PierreL
-
Posts
23 -
Joined
-
Last visited
Everything posted by PierreL
-
Thank you for this CAD file that I previously seen on Mooneyspace. The bendix trim screw holes don't correspond to the one I have. It might be adjusted. I was just wondering if someone already had this 3D printed and how it looks like. -
Hello, I am looking for this 2 plastic parts : Reading at others posts it was not clear for me if they can be purchased or 3D printed and what is the cost. Any advice is welcome. Many thanks.
-
Hello everyone, I am looking for switch covers (master switch and fuel pump) for my 89 M20J. Switch references should be 930023-211 and 213. Lasar does not provide them anymore. Do you where they could be purchased? Many thanks.
-
Hello, I got a Mooney M20J with a cowl flap motor unserviceable. Where did you get it overhauled? Pierre
-
Thank you Rick, that will be helpful to receive these pictures. No rush, I can continue using the paper clip for a while. Regards Pierre
-
Thank you for your post. This is what I am using now. How did you fix it? When you found the pin where you able to remove the KAP front panel and replace it by yourself or you had to go through a repair center? Unfortunately I was not able to find this spare part so far.
-
Thank you for your reply. I will send some RFQ for this P/N
-
I received today the quote from Extant for the WX-500. Flate rate repair : $8,825 - Exchange : $13,237.50
-
Yesterday, when I took the Monney for a quick flight, I found out that the small white pin for the KAP150 self test was missing. Impossible to test the AP. It was quite unpleasant and I have no idea how this could have happened. Is anyone experienced such issue and solved it? Thanks
-
Many thanks for your reply. I will contact them.
-
Many thanks for your replies. I already contacted Valentine with no success. I will check with Extant Aerospace and let you know.
-
Hello, I have a WX-500 stormscope and need an EASA Form One before installing it. Do you know which companies in the US can provide such Form? Regards
-
Hello, I have a WX-500 stormscope and need an EASA Form One before installing it. Do you know which companies can provide such Form? Regards
-
Many thanks for all your replies. I will put the plane on jacks in the next weeks and first try to swap the switches. I will let you know if I solved my issue. Does anyone already replace such airspeed safety swith by a TCW USW-1 or equivalent? https://www.tcwtech.com/product/universal-switch-airspeed-kit/ Looking at the specs it should do the job.
-
Thank you PT20J. i have seen this microswitch swap method on Mooneyspace. I will try it at next visit. If the problem comes from the diaphragm or the seal it seems more difficult to fix.
-
Many thanks. looks like VEP reference for 880013-507 is 656-3. I will contact world magnetics asking for this reference.
-
Many thanks I just send him an email
-
Difficult to find
-
VEP V21614 drawing indicates Mooney P/N 880013-505 The one I am looking for is 880013-507. So I am not sure it is compatible.
-
Many thanks I will contact them if I cannot find it in the US.
-
Hello all, I am looking for an airspeed safety switch for a 1989 M20J and after contacting some Mooney service centers and Lasar it seems a bit tricky. Reference is 880013-507. Let me know which companies could supply these parts or if anyone knows an equivalent? Many Thanks
-
Hello all, I am looking for an airspeed safety switch for a 1989 M20J and after contacting Mooney service centers in Europe and Lasar it seems a bit tricky. Reference is 880013-507. Let me know which companies could supply these parts or if anyone knows an equivalent? Thanks
