bruce.m
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Media Demo
Events
Everything posted by bruce.m
-
Crossfire Magneto out of Florida. Very reasonable price and my mag actually got shipped to the wrong address due to the carrier mis-reading the address. They went door-to-door and found my mags and stayed in touch throughout the mishap. Installed, timed and test flew afterwards and can’t be happier. I’lll be using them again. Hope this helps!
-
They’re likely the original material and need to install new to see if that makes a difference as well. If you have a contact who supplies it, that would be greatly appreciated!
-
I’ve looked at the baffling and all looks good to me, but never thought of the light trick. I’ll try that to see if shines some light on something I’m just not seeing.
-
Thank you and after mentioning the pressure differential, it makes complete sense.
-
Does anyone know why this baffle plate is installed in front of the #1 cylinder? My #1 and #3 temps run around 40 degrees higher than #2 and #4. So much so that with cowl flaps closed, they will get to 400+ so I run them in the trailing position to keep them well below 400. I’ve tried adjusting the flaps and it makes no difference. I was thinking about removing this plate to see if it changes but wanted to ask before doing so. Thanks!
