Parts for sale 1963 M20C

[Alan Fox]

I am wrapping up the remaining parts on this C model....I have all flight control surfaces in very good condition... Flaps are 400 each , all others are 300 each , Gear legs w/old style goodyear stacks are 150 each (mains only) ,All 4 seats , 400.00 for all , engine mount 125.00 , Full cowl will sell individual parts (old style sheet metal screws on cheeks , not DZUS) , Gap seals as removed , Flap and aileron 175 for all ,  Johnson bar recivers upper and lower 200 for the pair , Full interior will sell individual parts , Cables up the Wazoo....Vernier prop and Mixture 100.00 each , throttle, cowl flap cables 75.00 each , Sandel 3308 1300.00 , ELTs D cell 50.00 each , Antennas  50.00 each , Fresh retread Main tires 100 for the pair, yokeshafts 125 for the pair , The list is endless.......Call Alan 856 419 5209 .....Please don't call and try to bargain prices , I am 1/2 to 1/3 the price of the big boys .... Regards... 

[Chimpanzee]

Hi Alan,

I have a 20C (#2307), the interior (specially plastics) looks pretty shaky. Plastic frame door has amjor crack, and the other parts, well... Do you have a picture of yours ? If you have please send to me by mail to squawknorbert@hotmail.com

Cheers
Norbert
 

[francisg]

Hi Alan,

 

Would you have a set of nose gear doors? please reply to fgondouin@lubriplate.com Thanks.

[Alan Fox]

No had a set of newer overlapping doors , that I sold to Lasar for 650..... Regards...

[kommers]

a nose wheel for my M20C 1962, by any chance? This thing loses pressure daily and I have to pump it up constantly

[yvesg]

Don't you need to replace the tube? Not the whole wheel?

Yves

[Alan Fox]

Yves is probably correct , these are not tubeless tires , and you probably need a tube , but if you want a nosewheel , its yours for 125.00 plus shipping....

[Hank]

How about the little sliding metal arm under the door? Mine has been bent and straightened many times, and gets frequent baths in Tri-Flow. I'm always afraid the next incident will be its last . . .

 

Also, when you take the ceiling panels out, could you either take a picture or remove [if it's not riveted on] whatever is attached to the ceiling under the scoop? Mine was damaged during GPS antenna install, then damaged again during WAAS antenna replacement, and I don't get much air out the front vents any more. I bought a piece sight unseen once, and of course it's the wrong part, a little U-shaped piece of metal with flanges out both sides. It's in the hangar, no need to throw it away since it's in good shape, right?

 

When I think of anything else, I'll send another message.

[Alan Fox]

The door prop is 50 plus shipping , the scoop is 80 plus shipping , and the vents are 80 plus shipping , The price reflects the hour it will take to carefully drill out the rivets for the roof items , and the door prop will come with all the hardware I can remove that it attaches with... Regards Alan 856 419 5209...