Igor_U Posted July 27 Report Posted July 27 I have following Mooney/Britain parts for sale, mainly spares for 67 M20F: 1. SOLD **Valve assembly - cutoff. p/n should be 2960 and it's working well, with new O-rings. Tested in the plane. ** SOLD 2. Pilot Valve assy, p/n 2965. Working. $100 with shipping included. 3. Solenoid Valve p/n 4085-2C. This is electrically operated vacuum valve for mid 70-is Mooneys with P/C system. it allows to have new J style control wheels with operating PC system. Very hard to find as I waited 4-5 years to get one, by that time I sold new style control wheels. Chance for you to have it for $200, shipping included. S O L D !! 4. Mooney PC System Turn Coordinator TC 100 EVS Brittain Industries Autopilot. Removed from 1968 M20F and it spins when on 12V DC. I had it for a spare. $100 + shipping. 5. Accutrack . Working unit, tested in the plane and I had it as a spare. $150 plus shipping. Please let me know or PM if you have any questions. Payment by Paypal F&F please.
Mooney-Shiner Posted September 26 Report Posted September 26 On 9/3/2025 at 10:54 AM, Igor_U said: Bump I wonder if there is a way to install Accutrack II device on my 67F that has Brittain wing leveler vac system and TC100EVS Autopilot Gyro? Any videos on that?
takair Posted September 26 Report Posted September 26 39 minutes ago, Mooney-Shiner said: I wonder if there is a way to install Accutrack II device on my 67F that has Brittain wing leveler vac system and TC100EVS Autopilot Gyro? Any videos on that? You should be able to. There is an add on STC that should still be available from Brittain. Not sure of videos, but @Kevin Westbrookshould be able to help. I built my system one piece at a time over many years. Now it is a great autopilot. It takes a little tinkering to get them set up, but once they are, they are a great autopilot, 1
Echo Posted September 26 Report Posted September 26 36 minutes ago, Mooney-Shiner said: I wonder if there is a way to install Accutrack II device on my 67F that has Brittain wing leveler vac system and TC100EVS Autopilot Gyro? Any videos on that? Yes. An AccuTrak can be installed, but you need additional components besides this unit shown. Look at my old threads. I installed an AccuFlite in my plane. There are two units needed. I had photos in the thread. I did majority of work myself with avionics installer down control connection and signing off. Scott (The two controllers you need are hard to find, but come up on Ebay when owners upgrade auto pilots) 1 1
Igor_U Posted September 28 Author Report Posted September 28 On 9/26/2025 at 5:36 AM, Mooney-Shiner said: I wonder if there is a way to install Accutrack II device on my 67F that has Brittain wing leveler vac system and TC100EVS Autopilot Gyro? Any videos on that? I would suggest you to look at downloads section and get the Brittain Accutrack install manual and get familiar with the install. As Echo said above, you will also need that Pilot Servo Valve and some wiring and tubing. Attached is the picture from the manual with all components. It's a very simple system and in my old plane, it was working reliablly tracking the GPS (nav 1) and VOR/LOC (Nav2). Regards, 1
jeremyc209 Posted Thursday at 09:00 PM Report Posted Thursday at 09:00 PM Just FYI, this is an Accutrak (not the II), the Accutrak II has rocker switches and a backlit panel (I think) 1
Recommended Posts