Garmin GTN 650 Monitor function

[dfurst]

Question about functionality of Garmin GTN 650 when using the Monitor function.  Here is the scenario

Approaching airport.  I have ATC on the radio and CTAF in the standby frequency. 

I press the "Mon" button so I can listen to CTAF when ATC is quiet. This works well.

I then press the frequency to flip/flop the frequencies.  I am now listing to CTAF and ATC is in the standby window.

I would expect the "Mon" function to turn off when I flip/flopped the frequencies, but it does not.  I have to press the "Mon" function to turn it off.  Is this right? 

[jetdriven]

YES.  its annoying

[Pinecone]

I can see it both ways.

1)  You change which one is primary, but you still want to hear both.

or

2)  You want to only listen to the new primary.

[dfurst]

But my brain says, if I switch it, Mon should turn off. If I want to monitor the old frequency after the flip, my brain says I should press Mon.

 

Oh well.