Jump to content

G1000 DB.


GaryP1007

Recommended Posts

Sometimes it’s bc old nav data is on the bottom card. 
most certain way to correct is to format all three cards. 
make sure you only put nav data on the top card, and reinstall all db on both bottom cards. 
the new concierge makes you go through the nav data step each time so you could use two top cards, or just don’t reinstall the nav data on the second card updates. 
this takes a while bc flite charts and the 9 second arc or 4.9 second arc db are huge, but always fixes the problem…

  • Like 1
Link to comment
Share on other sites

I have seen that happen after loading new data but not completely restarting after it’s been loaded on both the pfd and mfd.  it even shows that the data is the same on aux/sys pages but i had that error until turning everything off and starting up from scratch.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.