JoeM Posted October 10, 2022 Report Share Posted October 10, 2022 Anyone have a 6 pack (or 8 pack) pilot panel for sale. I am upgrading the original shotgun panel. PM or reply. Thanks Quote Link to comment Share on other sites More sharing options...
carusoam Posted October 10, 2022 Report Share Posted October 10, 2022 See what @Alan Fox has on the shelf… Building a new panel is a relatively low cost piece of finished metal… It is all the R&R effort that gets costly… also look up Henderson, Hendrickson?… an old MSer with a metal shop that made a few variations for sale… Best regards, -a- Quote Link to comment Share on other sites More sharing options...
Guest Posted October 11, 2022 Report Share Posted October 11, 2022 4 hours ago, JoeM said: Anyone have a 6 pack (or 8 pack) pilot panel for sale. I am upgrading the original shotgun panel. PM or reply. Thanks I believe that LASAR used to sell a blank. A few hours work to fabricate one by tracing your old one, then laying out the new holes. You can also prototype one out of plexiglass first, drawing you layout of instruments to make sure there are no interferences. Quote Link to comment Share on other sites More sharing options...
gmonnig Posted October 11, 2022 Report Share Posted October 11, 2022 LASAR did a great job making me a 9hole panel and a copilot side panel. Just got my panel powder coated and turned out great. If you don’t need that many holes in your panel, I think the 8hole setup has a little more spacing. The one I have is very close spacing. I think around $500 total for both? $150 for powder coating. The Gi-275s, AV20S and Garmin USB port are still missing in this picture. 2 Quote Link to comment Share on other sites More sharing options...
carusoam Posted October 11, 2022 Report Share Posted October 11, 2022 Gmon wins the best install of a Sensorcon award today! That device looks like it belongs there. Best regards, -a- 1 Quote Link to comment Share on other sites More sharing options...
cliffy Posted October 15, 2022 Report Share Posted October 15, 2022 I just flushed my entire panel for a Dynon HDX in my 64D I have the panel in the hangar 2 Quote Link to comment Share on other sites More sharing options...
carusoam Posted October 15, 2022 Report Share Posted October 15, 2022 Cliffy, let’s let @JoeM know what you have… (this is an invite for Joe to stop by) Best regards, -a- 1 Quote Link to comment Share on other sites More sharing options...
JoeM Posted October 15, 2022 Author Report Share Posted October 15, 2022 Thanks Anthony. Cliffy, PM sent. Quote Link to comment Share on other sites More sharing options...
M20F-1968 Posted October 17, 2022 Report Share Posted October 17, 2022 On 10/10/2022 at 4:18 PM, JoeM said: Anyone have a 6 pack (or 8 pack) pilot panel for sale. I am upgrading the original shotgun panel. PM or reply. Thanks I have a panel which you could possibly use. It would need to be cut and altered. I built it for my plane when I planned to use steam gauges. The project took so long I ended up with Garmin GTN's. I'll look for a picture. John Breda Quote Link to comment Share on other sites More sharing options...
MMsuper21 Posted October 28, 2022 Report Share Posted October 28, 2022 Just call Hendricks mfg. Very reasonable and awesome. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.