Jump to content

MP/FP Gauge Renew


WAFI

Recommended Posts

4 hours ago, Fly Boomer said:

What if the gasket isn't reusable?

This gauge has the internal space vented through a vent port on the back of the gauge. The port is left open, so the gasket is just holding the glass in place.

There is a paper gasket between the glass and the face and a rubber gasket between the glass and the case. There are 8 little screws holding the face on. Make sure you have the proper screwdriver.

Don't try to clean the face, even water may smear the paint.

Link to comment
Share on other sites

4 hours ago, N201MKTurbo said:

This gauge has the internal space vented through a vent port on the back of the gauge. The port is left open, so the gasket is just holding the glass in place.

There is a paper gasket between the glass and the face and a rubber gasket between the glass and the case. There are 8 little screws holding the face on. Make sure you have the proper screwdriver.

Don't try to clean the face, even water may smear the paint.

Your hangar fairies are smarter than mine.  Thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.