Jump to content

Tips and Tricks for removing and reinstalling the Stall Switch


Recommended Posts

I unfortunately need to remove and replace my Stall Switch... I am looking at the inspection panel and the control rod between the hole and the Stall Switch, I am at a total loss for how to even access it. I am open to any ideas or suggestions as to how remove and replace. I also am open to any ideas that would allow me to fix it in place but it does not appear that is possible.

The failure I am having is that I can hear the micro switch make contact but the electrical contact is intermittent, I already went through the rest of the warning system and replaced the horn, the old one was working fine but was not the correct part number.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.