madreg98 Posted January 25, 2021 Report Share Posted January 25, 2021 Just purchased a 1988 M20j. Panel has two G5's, and a Century attitude indicator that drives a Century 2000 autopilot. The G5's are not totally compatible with the autopilot so need to keep the Century attitude indicator. The original AI and one of the G5s is located vertically in the center of the six pack. I would like to switch the other G5 with the original AI so I have both G5's in the vertical alignment and put the original AI someplace on the panel. I am looking for a reasonably priced electronics shop that could do this. I fly out of KSGJ but can go where I have to in northern FL or southern GA. I have used Island Aviation in the past but Gary at Fernandina Beach closed up shop. Any suggestions would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted January 25, 2021 Report Share Posted January 25, 2021 I think any AP can handle this, I would ask whomever maintains your plane today, maybe an annual work item. Quote Link to comment Share on other sites More sharing options...
Steve W Posted January 25, 2021 Report Share Posted January 25, 2021 If the Century 2000 has a flight director then it has to stay in the primary position per the Garmin STC on the G5. If not then yes you can move it. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.