hammdo Posted December 28, 2020 Report Share Posted December 28, 2020 I’d like to get one for the hat rack and baggage area. May have to make my own :o) Just thought I’d put that out there... -Don Quote Link to comment Share on other sites More sharing options...
Hank Posted December 28, 2020 Report Share Posted December 28, 2020 I've not seen any. Just have those worthless narrow straps anchored inches from the nearest walls . . . . Quote Link to comment Share on other sites More sharing options...
hammdo Posted December 28, 2020 Author Report Share Posted December 28, 2020 Yep, same here, so I better get creative then ‘o) -Don Quote Link to comment Share on other sites More sharing options...
RLCarter Posted December 28, 2020 Report Share Posted December 28, 2020 These guys will make what ever you want HERE, if your looking for the ones like bungee cords go to a motorcycle shop, they are like 14x14 and you can hook them together 1 Quote Link to comment Share on other sites More sharing options...
EricJ Posted December 28, 2020 Report Share Posted December 28, 2020 You can buy generic cargo nets at places like Harbor Freight or wherever. Get a big suitably sized one and cut to fit. Quote Link to comment Share on other sites More sharing options...
Hank Posted December 28, 2020 Report Share Posted December 28, 2020 5 minutes ago, EricJ said: You can buy generic cargo nets at places like Harbor Freight or wherever. Get a big suitably sized one and cut to fit. If only there were hook locations in the corners of the baggage area . . . . Quote Link to comment Share on other sites More sharing options...
hammdo Posted December 28, 2020 Author Report Share Posted December 28, 2020 Just now, Hank said: If only there were hook locations in the corners of the baggage area . . . . That is the deal.. where to hook ‘em right and sturdy... was hoping a kit (like the shoulder seat belts kits) existed... all good... -Don Quote Link to comment Share on other sites More sharing options...
larryb Posted December 29, 2020 Report Share Posted December 29, 2020 Like this?I found a shop that did the custom net, organizer, and attach hardware. The only thing missing were the seat rail clamps, they didn’t have a version which fits the mooney rails. I designed those and 3D printed them. I was unsure how strong printed plastic parts could be so I built a test fixture and tested them to failure at 700 lb. I figured 4 X 700 = 2800 lb should be sufficient for the lower attach points. Quote Link to comment Share on other sites More sharing options...
hammdo Posted December 29, 2020 Author Report Share Posted December 29, 2020 Yea! id like to keep it only for the baggage area as in over the top of items since I have the back seats... very cool setup there! -Don Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.