Jump to content

Surefly Runs Rough


Recommended Posts

Below is  picture  from Top Cylinder #3 with  Surefly SIM and Maggie Ignition Harness and factory tempest fine wire  gap. Sorry the Picture isn't the best. I have close  to 90 hrs on them. I had forgotten the labeling on the Maggie Ignition harness leads was labeled incorrect also Ignition leads on Cylinder's #2 & #4  they fit  but they are too short they wouldn't follow the same routing of the Bendix leads along the cylinder rocker covers that go to the bottom plugs.  About 90hrs down  and about another 1910 hrs to go before the Surefly needs an overhaul :D and about 410 hrs before the Right Bendix magneto needs to be overhauled. That is the hope anyways.

 

James '67C

Screen Shot 2021-01-03 at 6.17.37 PM.png

image.png

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.