FlyRye Posted July 24, 2020 Report Share Posted July 24, 2020 Does anyone have a Manifold Pressure / Fuel Pressure gauge combo for a 1962 M20C? Ours have been sticking and would like a functioning one. Thanks in advance!! Quote Link to comment Share on other sites More sharing options...
bob865 Posted July 24, 2020 Report Share Posted July 24, 2020 I have one I just took out of my '75 E model. What is the pressure range you need for the fuel pressure? I think the fuel injected and carbureted ranges are different. Quote Link to comment Share on other sites More sharing options...
carusoam Posted July 24, 2020 Report Share Posted July 24, 2020 Unfortunately.... The 65C has O360, carb, and 0-6psi fuel P range.... Check these details in the event I have crummy memory... PP thoughts only, not a mechanic... See if Alan has one on the shelf... Best regards, -a- Quote Link to comment Share on other sites More sharing options...
David Lloyd Posted July 24, 2020 Report Share Posted July 24, 2020 Where would be a good place to have the old one adjusted/recalibrated/repaired? My gauge reads about 1.5" low. Quote Link to comment Share on other sites More sharing options...
carusoam Posted July 24, 2020 Report Share Posted July 24, 2020 Does MS have a favorite instrument shop..? A typical calibration of the gauge would work... An ordinary skill for a good instrument shop. Best regards, -a- Quote Link to comment Share on other sites More sharing options...
mooniacX Posted July 24, 2020 Report Share Posted July 24, 2020 I have one out of a 64C. I put in a EDM900 and still have everything that was replaced. Quote Link to comment Share on other sites More sharing options...
FlyRye Posted July 24, 2020 Author Report Share Posted July 24, 2020 1 hour ago, mooniacX said: I have one out of a 64C. I put in a EDM900 and still have everything that was replaced. Can you email me your info please so I can contact you directly? pascu123@yahoo.com Quote Link to comment Share on other sites More sharing options...
FlyRye Posted July 25, 2020 Author Report Share Posted July 25, 2020 17 hours ago, bob865 said: I have one I just took out of my '75 E model. What is the pressure range you need for the fuel pressure? I think the fuel injected and carbureted ranges are different. Quote Link to comment Share on other sites More sharing options...
FlyRye Posted July 25, 2020 Author Report Share Posted July 25, 2020 It seems to be .5 -6.0. Let me know if this is what you have. pascu123@yahoo.com Quote Link to comment Share on other sites More sharing options...
Jim Peace Posted July 25, 2020 Report Share Posted July 25, 2020 its only the beginning.....rip it all out and go JPI-900....... Quote Link to comment Share on other sites More sharing options...
jwarren2 Posted July 26, 2020 Report Share Posted July 26, 2020 (edited) I believe buzz222 has one listed on eBay right now if you’re interested. Edited July 26, 2020 by jwarren2 Too many 2’s. Quote Link to comment Share on other sites More sharing options...
jamesm Posted July 26, 2020 Report Share Posted July 26, 2020 I have one of a '67C if you are interested. James '67C Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.