Speed Merchant Posted July 24, 2020 Report Share Posted July 24, 2020 I am wondering if anyone has a drawing , DWG file, Step File or DFX file to cut out the left hand pilot panel on a CNC. Ideally I want to mount the 10 inch G3X, G5 and either GFC-500 or JPI-930 on the panel. Has anyone done that? Pictures would help to. Thanks! Quote Link to comment Share on other sites More sharing options...
PJClark Posted July 24, 2020 Report Share Posted July 24, 2020 I don't have the drawing but this is what it looks like in an '86 252. The GFC500 controller is in line with the switches just above the throttle. That is an EDM900 not a 930 2 Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted July 24, 2020 Report Share Posted July 24, 2020 I don't have the drawing but this is what it looks like in an '86 252. The GFC500 controller is in line with the switches just above the throttle. That is an EDM900 not a 930 I’d like to do something very similar, except my 900 will be in portrait orientation, probably move G5 to the left side. I will also replace the expensive switch/breakers with generic rocker switches and standard pull circuit breakers. 2 Quote Link to comment Share on other sites More sharing options...
Speed Merchant Posted July 25, 2020 Author Report Share Posted July 25, 2020 14 hours ago, PJClark said: I don't have the drawing but this is what it looks like in an '86 252. The GFC500 controller is in line with the switches just above the throttle. That is an EDM900 not a 930 That is beautiful!! Who did the installation for you? I really like the location of the JPI and autopilot controller. Thanks for sharing the picture- very nice! Quote Link to comment Share on other sites More sharing options...
PJClark Posted July 25, 2020 Report Share Posted July 25, 2020 Advanced Aero Technologies Group AATG Greeley, CO Quote Link to comment Share on other sites More sharing options...
Harry Wightman Posted July 25, 2020 Report Share Posted July 25, 2020 Also no file but pictures if they help- 1 Quote Link to comment Share on other sites More sharing options...
Speed Merchant Posted July 28, 2020 Author Report Share Posted July 28, 2020 very sweet! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.