MisfitSELF Posted May 31, 2020 Report Share Posted May 31, 2020 For the folks who've installed the liners. I just got mine and was looking for advice on techniques to fit and trim them in addition to what you did in regards to painting them. Thanks. Bruce Quote Link to comment Share on other sites More sharing options...
Igor_U Posted June 1, 2020 Report Share Posted June 1, 2020 Mine came installed by previous owners but I removed them for annual with no issues. Not sure if trim is needed for first installation. When I repainted the plane, shop removed them and repaint it from both sides in white. Quote Link to comment Share on other sites More sharing options...
MisfitSELF Posted June 1, 2020 Author Report Share Posted June 1, 2020 Trimming is required. Quote Link to comment Share on other sites More sharing options...
Mark89114 Posted June 2, 2020 Report Share Posted June 2, 2020 What do they do? 1 Quote Link to comment Share on other sites More sharing options...
MisfitSELF Posted June 2, 2020 Author Report Share Posted June 2, 2020 13 hours ago, Mark89114 said: What do they do? https://lasar.com/mods Quote Link to comment Share on other sites More sharing options...
Sabremech Posted June 10, 2020 Report Share Posted June 10, 2020 Started fitting mine the last day or two. Just a little filing so far to make sure they don’t touch the bottom of the wing or structure. Initial fitting seems to indicate the left liner may be a little short. Will deal with that if it turns out that way when I start to put fasteners in. David Quote Link to comment Share on other sites More sharing options...
tigers2007 Posted June 10, 2020 Report Share Posted June 10, 2020 What do they do? “Reduces the turbulent air flow in the main wheel well, and provides a barrier for mud, debris & mice.”Supposedly adds 1 MPH. I wouldn’t mind having these to prevent runway slush and mud from being blown into the wheel well. Quote Link to comment Share on other sites More sharing options...
Skates97 Posted June 11, 2020 Report Share Posted June 11, 2020 Would love to see more pictures of the install and the final result. I have been kicking around the idea of this mod for the last couple years. Quote Link to comment Share on other sites More sharing options...
bradp Posted June 11, 2020 Report Share Posted June 11, 2020 They remove easily for inspection ? Quote Link to comment Share on other sites More sharing options...
David Lloyd Posted June 11, 2020 Report Share Posted June 11, 2020 . Initial fitting seems to indicate the left liner may be a little short. Will deal with that if it turns out that way when I start to put fasteners in. Funny, I installed these 40 years ago in a C and seems to remember the left liner being about an inch short. Okay maybe it was only 38 years. 1 1 Quote Link to comment Share on other sites More sharing options...
Sabremech Posted June 11, 2020 Report Share Posted June 11, 2020 5 hours ago, bradp said: They remove easily for inspection ? Yes. Quote Link to comment Share on other sites More sharing options...
tmo Posted June 23, 2020 Report Share Posted June 23, 2020 Then I probably need them too... Grass field and all that... +2 for the frequent progress reports. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.