Joe Larussa Posted May 30, 2020 Report Share Posted May 30, 2020 Anyone know what causes these areas to crack on a fresh paint job? It’s on the cowling. is it avoidable? Quote Link to comment Share on other sites More sharing options...
N201MKTurbo Posted May 30, 2020 Report Share Posted May 30, 2020 It would be interesting to know what the paint shop did to the cowling before they painted it. I suspect they used a polyester based filler (Bondo) to smooth it out. Polyester will not bond to epoxy and is stiffer so it will delaminate and crack. I’ve found it is best to just lay up new layers of fiberglass/epoxy and blend that in. You can make a comparable filler by mixing cabosil and micro spheres in with epoxy to make a paste, but you might as well use cloth. It isn’t any harder and it gives a better result. Unfortunately, it takes a lot more time to do it right. Besides, the service manual is very specific about what materials can be used for cowling repair. I would bet they didn’t use the antimony trioxide either. 2 Quote Link to comment Share on other sites More sharing options...
Joe Larussa Posted May 30, 2020 Author Report Share Posted May 30, 2020 This is what it looked like before the repair Quote Link to comment Share on other sites More sharing options...
N201MKTurbo Posted May 30, 2020 Report Share Posted May 30, 2020 Did you fix it or the paint shop? Quote Link to comment Share on other sites More sharing options...
Joe Larussa Posted May 30, 2020 Author Report Share Posted May 30, 2020 1 hour ago, N201MKTurbo said: Did you fix it or the paint shop? The paint shop. I guess I can live with it, as long as it doesn’t get worse. 1 Quote Link to comment Share on other sites More sharing options...
Andy95W Posted May 30, 2020 Report Share Posted May 30, 2020 I think Rich's comments are right on. Another person who may have some experience is Byron @jetdriven. Quote Link to comment Share on other sites More sharing options...
PT20J Posted May 31, 2020 Report Share Posted May 31, 2020 Agree that it's something relative to the repair. I'd take it back to the paint shop. Polyurethane aircraft paint is very flexible (unlike automotive paint) so it can be applied to fabric without cracking. Skip Quote Link to comment Share on other sites More sharing options...
jetdriven Posted May 31, 2020 Report Share Posted May 31, 2020 That Fiberglas is still moving. When it moves it cracks. And then the holes Waller out. You have to scarf out the repair and blend it back about 2-3”. It’ .120” of 8oz aircraft fiberglass and structural epoxy Then. Knock it flat, make a .250 hole, countersink it, and prime Then paint. Ours was done 5 years ago, still looks new. I think a lot of paint shops spackle body filer into the hole, or polyester resin and some chopped glass, and then re-drill the hole and countersink. You cant cheat like that. These guys didn’t even drill a .250 hole and countersink. They put a large washer over The messed up bodywork. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.