Jump to content

Mooney 3D Print Library


MisfitSELF

Recommended Posts

Is there a site or forum that has links specifically to or for Mooney Parts?   I know about the rocker switch covers and purchased one off Shapeways a couple of years ago  but was hoping that there would be a "one stop" listing of things or model files that are available online from either Shapeways or Thingverse that are meant as simple Mooney replacement parts that could be 3D printed.

I'm thinking that would be a good "sticky" for Mooneyspace.

(of course standard disclaimers apply in terms of owner produced parts....yadda yadda yadda)

  • Like 1
Link to comment
Share on other sites

On 5/27/2020 at 6:43 PM, carusoam said:

Expect that we have a download section around here...

This would be a good place for 3D printing files...

Best regards,

-a-

That's a good idea.  The admins could add a category for 3d print files.

Link to comment
Share on other sites

On 5/27/2020 at 9:05 PM, corn_flake said:

I'll bite.  It's not specific to Mooney, but it may be useful 

Prop Angle Gauge.  Print them and buy a 3/4" square aluminum pipe from Home Depot.  Attach to the prop and measure the angel.  

Prop Angle Gauge v2.stl 2.62 kB · 2 downloads

 

P1040491.JPG

Now we need a version for control surface rigging!  Could use the same setup perhaps?

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.