Cyril Gibb Posted February 19, 2020 Report Share Posted February 19, 2020 I’m putting this here because a j model might be the same as my F Does anyone know the location of the transistor panel in a 75F? Similarly does anyone know if the 5a fuse off the circuit breaker panel (flaps/autopilot/gauges row) is collocated or remote? Quote Link to comment Share on other sites More sharing options...
Guitarmaster Posted February 19, 2020 Report Share Posted February 19, 2020 I’m putting this here because a j model might be the same as my F Does anyone know the location of the transistor panel in a 75F? Similarly does anyone know if the 5a fuse off the circuit breaker panel (flaps/autopilot/gauges row) is collocated or remote? It's on top of the nose wheel well. Quote Link to comment Share on other sites More sharing options...
Yetti Posted February 19, 2020 Report Share Posted February 19, 2020 (edited) Held on with 4 screws and 2 adel clamps. There are three fuses on the transistor panel with these plug in fuses https://www.alliedelec.com/product/littelfuse/37011000410/70184438/?gclid=CjwKCAiA1rPyBRAREiwA1UIy8B5HSZbdXFH3Y3ElfyKiNElyBO49IzJyLxVcVpSZ_Txu_-WIpi2E5RoC2PQQAvD_BwE&gclsrc=aw.ds They are fed via the 2 CB called Inst. Lts middle row. Edited February 19, 2020 by Yetti Quote Link to comment Share on other sites More sharing options...
Cyril Gibb Posted February 19, 2020 Author Report Share Posted February 19, 2020 Thanks guys. Replaced a bad fuse on the transistor panel. It works now to find the fuse behind the breaker panel 1 Quote Link to comment Share on other sites More sharing options...
Yetti Posted February 20, 2020 Report Share Posted February 20, 2020 5 hours ago, Cyril Gibb said: Thanks guys. Replaced a bad fuse on the transistor panel. It works now to find the fuse behind the breaker panel There are two one on either side of the shunt mounted on the firewall. Handy to wire in a ampmeter for fancy panel. Took them apart and soldered the wires into the ends that sit on the fuses. copilot side middle of the access panel burried under the wiring harness. Got lucky and worked the first time. Also put the voltmeter wire there. Quote Link to comment Share on other sites More sharing options...
Cyril Gibb Posted February 20, 2020 Author Report Share Posted February 20, 2020 Ok all working now. Thanks 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.