Jump to content

Looking for a up lock and down lock block for CNC owner produced


Recommended Posts

22 hours ago, hammdo said:

Those look awesome! Understand the wait...

Thanks for the report!

Can you also give us the bolt, nut sizes/#s - just to be safe?

-Don

Hi Don,

I’ll need to get the part numbers out of the manual but the bolts are all AN3-XX

Thanks,

David

Link to comment
Share on other sites

I have what I think is correct:

Down lock block:

AN 3-26A Bolt

AN 960-10 Washer

AN 363-1032 Nut

Up lock block:

AN 3-17A Bolt

AN 960-10 Washer

AN 363-1032 Nut

Aviall here I come!

at least that’s what my manual says ;o)

I’m assuming the push down lock block button unscrews so that assembly can be removed/installed. Don’t see that breakdown in my manual as I believe those early model Mooneys didn’t have them...

The SB for models without the button lock block on how to add the revised block:

https://cdn2.hubspot.net/hubfs/4147179/technical_documents/service_bulletins/sbm20-88b.pdf

FYI preloads in that SB are wrong. This SI corrects those:

https://cdn2.hubspot.net/hubfs/4147179/technical_documents/service_instructions/sim20-32.pdf

Edit:

David was quick!

-Don

Link to comment
Share on other sites

8 minutes ago, Jim Peace said:

so may pages to look at....Who can I contact to get a gear down block?

Jim

Hi Jim,

I’m trying to think of how best to handle another small order and comply with the owner produced rules since we already have a drawing and material spec. It may be that you provide the material to comply.

I’ll check with the machine shop on what the cost would be for a single part.

Thank you,

David

  • Thanks 1
Link to comment
Share on other sites

13 minutes ago, Sabremech said:

Hi Jim,

I’m trying to think of how best to handle another small order and comply with the owner produced rules since we already have a drawing and material spec. It may be that you provide the material to comply.

I’ll check with the machine shop on what the cost would be for a single part.

Thank you,

David

Thank you,

I have a call and email into LASAR as well.....webite says they have them but they dont answer the phone or return emails that quickly....could be a CV thing

Link to comment
Share on other sites

1 hour ago, Jim Peace said:

Curious:  being that I contributed to the cause and was unable to get one of these and had to buy one from LASAR do I get my money back?

Hi Jim,

Let me know how much you contributed and why weren’t you able to get one of these? 
David

Edited by Sabremech
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.