Replacement VOR antenna - 64C mooney -

[Supercop0184]

I need a new one - one side won’t stay erect anymore - there is no model or SN number on the disc or antenna anywhere!

 

any help!?

[Prior owner]

The one that fits a piper from Aircraft Spruce is a perfect fit.

[Prior owner]

This is the one that fit my 1964 M20D

 

VOR Antenna

Edited November 26, 2019 by PilotCoyote

[Supercop0184]

Great!! Thank you!!!

[Prior owner]

Keep in mind that the new one has an internal balun and so you may have to run a new coax cable up the tail with a BNC fitting on it.

[EricJ]

7 hours ago, Supercop0184 said:

I need a new one - one side won’t stay erect anymore - there is no model or SN number on the disc or antenna anywhere!

any help!?

Rent it some movies?

[Yetti]

Buy a roll of RG 400 with it and some BNC connectors.

[carusoam]

For additional info... the word balun will be easy to find...

RG400... everyone is doing it... if the ceiling is coming down...

Stuff that can be read around MS...  much of it written by the furry one...  

For Eric... It’s not a digital on/off challenge... he said one side didn’t work...  https://peyronies-disease.xiaflex.com/patient/?gclid=Cj0KCQiAt_PuBRDcARIsAMNlBdrJ60wbnUVPSGAeIzJSLCZXGcwgJBBvoGhO_IYF3r8cq4rL7_t1zVUaAg9xEALw_wcB&gclsrc=aw.ds

(Current TV ads... PP thoughts only, not a urologist... ) 
 

Best regards,

-a-

[N201MKTurbo]

55 minutes ago, carusoam said:

For additional info... the word balun will be easy to find...

RG400... everyone is doing it... if the ceiling is coming down...

Stuff that can be read around MS...  much of it written by the furry one...  

For Eric... It’s not a digital on/off challenge... he said one side didn’t work...  https://peyronies-disease.xiaflex.com/patient/?gclid=Cj0KCQiAt_PuBRDcARIsAMNlBdrJ60wbnUVPSGAeIzJSLCZXGcwgJBBvoGhO_IYF3r8cq4rL7_t1zVUaAg9xEALw_wcB&gclsrc=aw.ds

(Current TV ads... PP thoughts only, not a urologist... ) 
 

Best regards,

-a-

When I was a young thing and living in a communal house where we shared everything. My good friend had that. He had to do it sideways.

 

BTW, it was a coed house. Not that that matters.

[corn_flake]

12 hours ago, Supercop0184 said:

I need a new one - one side won’t stay erect anymore

 

LOL

[Guest]

I’ve seen some of those with a very small screw through the disc into the metal rod, this keeps the rod in the correct plain.  I don’t know if it was stock or added by a hangar fairy

Clarence