Duane Baker Posted October 13, 2019 Report Share Posted October 13, 2019 How do you get the screen out, it looks like there is no room to pull it out with out pulling the engine. Quote Link to comment Share on other sites More sharing options...
laytonl Posted October 13, 2019 Report Share Posted October 13, 2019 It’s a pain to remove but it is doable. There is a video link somewhere on MooneySpace about how to do it. I’m lousy at searching the site. Maybe someone can post the link. Lee Quote Link to comment Share on other sites More sharing options...
N201MKTurbo Posted October 13, 2019 Report Share Posted October 13, 2019 If you remove the oil filter and stand on a step ladder, you can reach your arm straight down where the oil filter was and easily get it out. Quote Link to comment Share on other sites More sharing options...
tigers2007 Posted October 13, 2019 Report Share Posted October 13, 2019 Checkout my recent post here: You may be surprised to find some crap there if the screen hasn't been attended to in a while. Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted October 13, 2019 Report Share Posted October 13, 2019 I heard doing the safety wire after replacing is the hardest part?Tom Quote Link to comment Share on other sites More sharing options...
laytonl Posted October 13, 2019 Report Share Posted October 13, 2019 See this: Is this the video you were thinking of https://mooneyspace.com/topic/26423-any-tricks-to-pulling-oil-screen-on-io-360/page/3/?tab=comments#comment-433113? (You may need to scroll to the video by @AGL Aviation). We remembered it was Lynn from AGL Aviation who had posted tge video – it made the search a bit easier. (We agree the search function on the site isn’t always easy!) Best, Debbie 1 Quote Link to comment Share on other sites More sharing options...
PT20J Posted October 13, 2019 Report Share Posted October 13, 2019 I think the bloody knuckles says it all Quote Link to comment Share on other sites More sharing options...
cliffy Posted October 14, 2019 Report Share Posted October 14, 2019 To get it out you need to remove the cap from the long screen first then there is enough room to slide the screen out. Goes back in the same way. Always use a new copper ring and the correct torque. Have no little kids around wen you go to safety wire the cap however. 1 Quote Link to comment Share on other sites More sharing options...
Nippernaper Posted October 14, 2019 Report Share Posted October 14, 2019 If you remove the oil filter and stand on a step ladder, you can reach your arm straight down where the oil filter was and easily get it out. Does this same technique work for safety wiring after reinstallation?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
N201MKTurbo Posted October 14, 2019 Report Share Posted October 14, 2019 15 minutes ago, Nippernaper said: Does this same technique work for safety wiring after reinstallation? Sent from my iPhone using Tapatalk Somewhat. You can get one hand down there. you can fish the lockwire through the holes, but twisting it is still a PITA. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.