RDuplechin Posted August 9, 2019 Report Share Posted August 9, 2019 I know the part numbers are different but does anyone know if 66 20F seats can be used in a 65 20E? I want to add head rests (and shoulder harnesses) to my 65 20E. I have found a complete set of matching seats from a 66 20F with real good upholstery for sale. I think the front seats should go right in to my 65 without problem but the back seats concern me. My current back seat in the 65 20E is one solid back. The 66 20F back seat appears to have a split back that looks like two bucket seats. Does anyone know if I can make the swap? Or, does anyone know the best way to get high backs and/or head rests on to the front seats of my 65 20E? Thanks. Quote Link to comment Share on other sites More sharing options...
Hank Posted August 9, 2019 Report Share Posted August 9, 2019 Don't know about making the back taller, but several people here added headrests from their local junkyard; seems a particular Toyota model has the correct spacing between support rods, and they drop right into seats that have not previously had headrests. Quote Link to comment Share on other sites More sharing options...
David Lloyd Posted August 10, 2019 Report Share Posted August 10, 2019 The headrests in my Nissan Frontier pickup fit my Mooney. 6" Spacing, 1/2" tube. Headrests internals are easy to fab, Airtex sent me instructions: 2 Pieces of 1/2" diameter stainless tube 12" long. 1 Piece of .064 sheet aluminum 3" x 7". Drill the sheet to the tubes and use machine screws to join. Upholster. 1 Quote Link to comment Share on other sites More sharing options...
RLCarter Posted August 10, 2019 Report Share Posted August 10, 2019 13 hours ago, David Lloyd said: The headrests in my Nissan Frontier pickup fit my Mooney. 6" Spacing, 1/2" tube. Headrests internals are easy to fab, Airtex sent me instructions: 2 Pieces of 1/2" diameter stainless tube 12" long. 1 Piece of .064 sheet aluminum 3" x 7". Drill the sheet to the tubes and use machine screws to join. Upholster. You wouldn't happen to have those instructions would you? Quote Link to comment Share on other sites More sharing options...
DustinNwind Posted August 10, 2019 Report Share Posted August 10, 2019 Do you have photos of what it looks like after? Quote Link to comment Share on other sites More sharing options...
David Lloyd Posted August 10, 2019 Report Share Posted August 10, 2019 Instructions aren't much more than already told. My Mooney used 1/2" tube, not 3/8". Detailed instruction steps for each picture Step 1 Use.064 aluminum Step 2 Four tubes three eighths stainless steel 12 inches long Step 3 Measure existing holes for proper spacing Step 4 Cut plate down to 3 x 7 Step 5 Predrill holes Step 6 Number 8 machine screw Stept 7 Number 8 locknut Step 8 Finished product Taking foam off one of the rear seats. The 5/8" tube holds the 1/2" tube of the headrest. Don't have finished product yet. About 4 weeks away. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.