Trailboss Posted June 20, 2019 Report Share Posted June 20, 2019 Panel upgrade replaced all switches. I have a set of the ETA Rocker Switches for sale. Out of an '88 J, show typical wear but all covers are intact. All working when removed. $150 each. I also have some replacement blank, 3D printed covers that I'll throw in. Quote Link to comment Share on other sites More sharing options...
Oldguy Posted June 20, 2019 Report Share Posted June 20, 2019 What did you replace them with, if I may ask? Quote Link to comment Share on other sites More sharing options...
Trailboss Posted June 20, 2019 Author Report Share Posted June 20, 2019 Replaced with some Honeywell LED Backlit switches with separate circuit breakers in stead of the switch/breaker combination. 2 Quote Link to comment Share on other sites More sharing options...
jaylw314 Posted June 20, 2019 Report Share Posted June 20, 2019 42 minutes ago, Trailboss said: Replaced with some Honeywell LED Backlit switches with separate circuit breakers in stead of the switch/breaker combination. Pictures??!?!? Was your mechanic OK signing off on that as a minor modification? Quote Link to comment Share on other sites More sharing options...
Trailboss Posted June 20, 2019 Author Report Share Posted June 20, 2019 The avionics shop signed-off with a "these switches are standard hardware equipment..." blurb. The did a load test on the installation and determined no functional difference between the original installation. 7 Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted June 20, 2019 Report Share Posted June 20, 2019 Replaced with some Honeywell LED Backlit switches with separate circuit breakers in stead of the switch/breaker combination. I want do this as well, did you use AML or MML switches?Tom Quote Link to comment Share on other sites More sharing options...
Trailboss Posted June 20, 2019 Author Report Share Posted June 20, 2019 AML. AML24FBA2AA02 is the Honeywell part number. Quote Link to comment Share on other sites More sharing options...
jaylw314 Posted June 20, 2019 Report Share Posted June 20, 2019 (edited) 1 hour ago, Trailboss said: The avionics shop signed-off with a "these switches are standard hardware equipment..." blurb. The did a load test on the installation and determined no functional difference between the original installation. I wanna see a pic with the lights on! That's good to know about the signoff, it might help others who look to change it, thanks! Edited June 20, 2019 by jaylw314 1 Quote Link to comment Share on other sites More sharing options...
ijs12fly Posted August 18, 2019 Report Share Posted August 18, 2019 How did they do the lettering on the switches? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
JohnB Posted August 18, 2019 Report Share Posted August 18, 2019 On 6/20/2019 at 3:20 PM, jaylw314 said: I wanna see a pic with the lights on! That's good to know about the signoff, it might help others who look to change it, thanks! On 6/20/2019 at 2:20 PM, Trailboss said: AML. AML24FBA2AA02 is the Honeywell part number. +1 on that. Trailboss, Can you share a picture of your panel at night with the led backlights on? I would love to see that to see if I need to add these switches to my next wanted list! Quote Link to comment Share on other sites More sharing options...
Trailboss Posted August 20, 2019 Author Report Share Posted August 20, 2019 On 8/18/2019 at 9:46 AM, ijs12fly said: How did they do the lettering on the switches? Sent from my iPhone using Tapatalk The shop has a laser printer / engraver that they used for all the panel lettering and switch labels. On 8/18/2019 at 10:19 AM, JohnB said: +1 on that. Trailboss, Can you share a picture of your panel at night with the led backlights on? I would love to see that to see if I need to add these switches to my next wanted list! I keep forgetting to snap a picture since it's been long days with light. Next time I'm up in the hanger, I'll get one and post it. 2 Quote Link to comment Share on other sites More sharing options...
Seattlekiddoc Posted August 26, 2019 Report Share Posted August 26, 2019 If you still have the Landing Light switch available I'm interested. Mine is very loose on my '82 M20K, working but the switch falls off if not careful. Quote Link to comment Share on other sites More sharing options...
201Mooniac Posted August 26, 2019 Report Share Posted August 26, 2019 On 8/20/2019 at 7:28 AM, Trailboss said: The shop has a laser printer / engraver that they used for all the panel lettering and switch labels. I keep forgetting to snap a picture since it's been long days with light. Next time I'm up in the hanger, I'll get one and post it. If he doesn't have one, I might, I'll need to check my hangar. Quote Link to comment Share on other sites More sharing options...
carusoam Posted August 27, 2019 Report Share Posted August 27, 2019 Welcome aboard KidDoc. I’ll let @Trailboss know you are asking... Bets regards, -a- Quote Link to comment Share on other sites More sharing options...
Trailboss Posted August 27, 2019 Author Report Share Posted August 27, 2019 19 hours ago, Seattlekiddoc said: If you still have the Landing Light switch available I'm interested. Mine is very loose on my '82 M20K, working but the switch falls off if not careful. Still have the Landing Light switch. I'll PM you. Quote Link to comment Share on other sites More sharing options...
Trailboss Posted October 4, 2019 Author Report Share Posted October 4, 2019 On 6/20/2019 at 4:20 PM, jaylw314 said: I wanna see a pic with the lights on! That's good to know about the signoff, it might help others who look to change it, thanks! 2 Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted October 4, 2019 Report Share Posted October 4, 2019 How did the shop do the labeling?Tom Quote Link to comment Share on other sites More sharing options...
Trailboss Posted October 7, 2019 Author Report Share Posted October 7, 2019 On 10/4/2019 at 4:38 PM, ArtVandelay said: How did the shop do the labeling? Tom The shop used a laser engraver on the panel and on the switches. Quote Link to comment Share on other sites More sharing options...
Trailboss Posted December 2, 2019 Author Report Share Posted December 2, 2019 Only remaining switches are the Landing Light (25Amp) and the Master Switch. Thanks all! Quote Link to comment Share on other sites More sharing options...
Jer Posted January 4, 2020 Report Share Posted January 4, 2020 Do you have the Fuel Boost Pump rocker switch? I didn't see it in the photo. I am actively seeking one or just the undamaged cover. Quote Link to comment Share on other sites More sharing options...
carusoam Posted January 4, 2020 Report Share Posted January 4, 2020 Welcome aboard Jer. I’ll send a message to @Trailboss and let him know you were asking... Best regards, -a- Quote Link to comment Share on other sites More sharing options...
Trailboss Posted January 6, 2020 Author Report Share Posted January 6, 2020 On 1/3/2020 at 5:47 PM, Jer said: Do you have the Fuel Boost Pump rocker switch? I didn't see it in the photo. I am actively seeking one or just the undamaged cover. I don't. Only remaining switch is the Master. Quote Link to comment Share on other sites More sharing options...
201Mooniac Posted January 6, 2020 Report Share Posted January 6, 2020 No boost pump but if it helps anyone I have a master, a radio master, and a trim switch sitting around. Quote Link to comment Share on other sites More sharing options...
Jer Posted January 6, 2020 Report Share Posted January 6, 2020 Thanks guys. I think I will just ask my avionics shop to replace it with something new, since I can't find the right cover. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.