Rocker Switch Covers

[Mooneycrazy]

Regarding the original rocker switch covers...I read somewhere on here that others were trying the " Shapeways" product . So I ordered some and found them to be a little larger in size and fitting a bit loose. Overall they just look bad. Anyone know of any other manufacturer ? 

Edited February 21, 2019 by Mooneycrazy

[Marauder]

2 hours ago, Mooneycrazy said:

Regarding the original rocker switch covers...I read somewhere on here that others were trying the " Shapeways" product . So I ordered some and found them to be a little larger in size and fitting a bit loose. Overall they just look bad. Anyone know of any other manufacturer ? 

Check with Ah-1 Cobra Pilot if you are looking for the Klixon version. He has made up a number of sets that are a better fit than Shapeways. If you are looking for ETA covers, you're SOL except for whatever is available on Shapeways.

[Mooneycrazy]

Mine are the Klixon switches,so I would assume they are the Klixon type switch covers? I was hoping to find covers that were like the original,very smooth and that type of molded plastic. The Shapeways covers are cheaper plastic,grainy texture and just look like a cheap toy. I will check out the Ah-1 Cobra Pilot,thanks!

[Mooneycrazy]

I cannot locate the ah-1 Cobra Pilot website.....do you have their address?

 

[Andy95W]

Not a website- a Mooneyspace member-

@Ah-1 Cobra Pilot

[AH-1 Cobra Pilot]

I have a variety of covers.  Let me know what you want/need.

[Bryan]

I have a couple of different style switches setup today for my inflateable door seal.  I am going thru a panel re-do, I will PM you for a couple of generic white switches.

[Mooneycrazy]

Cobra Pilot, what are your rocker covers..? are those the Shapeway covers with vinyl printing...? 

[carusoam]

Letting @Ah-1 Cobra Pilot Know he has a message...

-a-

[AH-1 Cobra Pilot]

11 hours ago, Mooneycrazy said:

Cobra Pilot, what are your rocker covers..? are those the Shapeway covers with vinyl printing...? 

No.  I print them with ABS, paint them, and laser cut the lettering.

[Mooneycrazy]

Ok,its hard too see on the photo...But I wanted to find out is will they fit my old Klixon switches? Those Shapeway covers are a little larger than the originals and when flipping the switch up or down, the switch rubbed(or interfered) with the opening.....If yours fit the Klixon switches then that would be great. Could you send me an email or another way to contact you, thanks

 

Edited February 23, 2019 by Mooneycrazy

[Mooneycrazy]

Cant contact Ah-1 Cobra Pilot....

 

[kpaul]

7 hours ago, Mooneycrazy said:

Cant contact Ah-1 Cobra Pilot....

 

Quote him, use the @ symbol followed by his user name …  @Ah-1 Cobra Pilot or click on his avatar to find the private message link.  Any of the three options will send him a message to check this thread.