kerry Posted February 4, 2019 Report Share Posted February 4, 2019 I have O360 and I'm wanting to make up new oil lines. My fittings looks like Stratoflex. The only numbers I see on the fittings are 1102-8.. I want to buy the hose from Aircraft spruce.. I'm thinking the size hose is 111-8 stratoflex hose. Can anyone confirm that for me. Quote Link to comment Share on other sites More sharing options...
Prior owner Posted February 4, 2019 Report Share Posted February 4, 2019 (edited) They are -8, but do you have the mandrel tool with 37 degree aircraft flare to install the fittings on the hose? You can use any hose that meets the MIL spec Edited February 4, 2019 by PilotCoyote Quote Link to comment Share on other sites More sharing options...
Guest Posted February 4, 2019 Report Share Posted February 4, 2019 If the hose “B” nut takes a 7/8” wrench the hose should be -8 or 1/2” ID. Clarence Quote Link to comment Share on other sites More sharing options...
Yetti Posted February 5, 2019 Report Share Posted February 5, 2019 The S&M manual would be best to confirm. You would not be working on the plane without one..... Quote Link to comment Share on other sites More sharing options...
Hank Posted February 5, 2019 Report Share Posted February 5, 2019 1 hour ago, Yetti said: The S&M manual would be best to confirm. You would not be working on the plane without one..... I would confirm for you, but my Manual is an hour away with my plane . . . . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.