Steve W Posted March 18, 2019 Report Share Posted March 18, 2019 On 3/17/2019 at 8:33 AM, DonMuncy said: Also very interesting to know. I may have to get me one of those small heat guns. They should work much better in tighter spots. I have the Portasol butane iron(I guess it's now the 75 watt version) with the heat end and deflector. But admittedly after starting this comment I remembered I've not used it on solder sleeves, only regular/environmental heat shrink. I like the iron shape better than the mini-torch shape. Quote Link to comment Share on other sites More sharing options...
DonMuncy Posted March 18, 2019 Report Share Posted March 18, 2019 14 minutes ago, Steve W said: I have the Portasol butane iron(I guess it's now the 75 watt version) with the heat end and deflector. But admittedly after starting this comment I remembered I've not used it on solder sleeves, only regular/environmental heat shrink. I like the iron shape better than the mini-torch shape. I wish you guys would stop with the new toys that I really ought to have. 1 1 Quote Link to comment Share on other sites More sharing options...
KB4 Posted May 29, 2019 Author Report Share Posted May 29, 2019 @larrynimmo this is what I used. Pick up some wire at same time No sync wire exists. There is a pin for the sync wire in Whelen connectors. We used Molex connectors with a cable tie to secure connector lengthwise Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.