Phil EF Posted December 22, 2018 Report Share Posted December 22, 2018 Anyone have thoughts on this scenario? Gear handle up and nothing happens. Push override and nothing happens, not even the normal horn and annunciations. After about three or four minutes it retracts. Extension is always normal. ‘79 M20K Quote Link to comment Share on other sites More sharing options...
irishpilot Posted December 22, 2018 Report Share Posted December 22, 2018 Yup, sounds like your up switch going out. It's the one in the gear well. Best way to ensure it is fixed right is to have your A&P put it on jacks, troubleshoot and then fix. Sent from my SM-N950U using Tapatalk Quote Link to comment Share on other sites More sharing options...
LANCECASPER Posted December 23, 2018 Report Share Posted December 23, 2018 33 minutes ago, Phil EF said: Anyone have thoughts on this scenario? Gear handle up and nothing happens. Push override and nothing happens, not even the normal horn and annunciations. After about three or four minutes it retracts. Extension is always normal. ‘79 M20K Check the small bar across the top of the emergency gear retraction handle. Backseat passengers kick this sometimes and if that bar is not secured where it is supposed to be the gear will not retract. Quote Link to comment Share on other sites More sharing options...
carusoam Posted December 23, 2018 Report Share Posted December 23, 2018 Somebody has a recent thread with the same description... search for limit switches in a recent gear thread. Best regards, -a- Quote Link to comment Share on other sites More sharing options...
xcrmckenna Posted December 23, 2018 Report Share Posted December 23, 2018 Sounds like the gear up limit switch. That was my symptoms and cause. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted December 23, 2018 Report Share Posted December 23, 2018 Check the small bar across the top of the emergency gear retraction handle. Backseat passengers kick this sometimes and if that bar is not secured where it is supposed to be the gear will not retract. That would not explain why it retracted after 3-4 minutes. Quote Link to comment Share on other sites More sharing options...
Phil EF Posted December 23, 2018 Author Report Share Posted December 23, 2018 Thanks for the input. Reading the wiring diagram does seem to point to the up limit. Will search that post. phil Quote Link to comment Share on other sites More sharing options...
rgpilot Posted December 24, 2018 Report Share Posted December 24, 2018 I had the same exact thing happen in my old M20J. I got underneath the plane in the hangar and used the wooden handle of a hammer to exercise the limit switch about 25 times. It's hard to push! Problem never came back. Quote Link to comment Share on other sites More sharing options...
Yetti Posted December 24, 2018 Report Share Posted December 24, 2018 Get a can of contact cleaner. normally found in the auto section of wally world or auto parts house. Could also be a relay going bad, but probably the limit switch. Since you are dirty and enjoy rolling around on the ground. Might as well pull the back panel and do the flap limit switches too. spray and exercise the switches. repeat several times. Quote Link to comment Share on other sites More sharing options...
N201MKTurbo Posted December 24, 2018 Report Share Posted December 24, 2018 (edited) It can also be the gear contractors (the big relays by the gear motor). With the plane on jacks, being careful to stay out of the way of the gear, tap the contractors and limit switches with the back of a screwdriver. It will often make the offending item work. This will indicate what needs fixing. Edited December 24, 2018 by N201MKTurbo Quote Link to comment Share on other sites More sharing options...
Phil EF Posted December 24, 2018 Author Report Share Posted December 24, 2018 Thanks for the input. Reading the wiring diagram does seem to point to the up limit. Will search that post. phil Exercised the up limit switch and started working. Thanks again for the input. Phil 1 Quote Link to comment Share on other sites More sharing options...
LANCECASPER Posted December 24, 2018 Report Share Posted December 24, 2018 33 minutes ago, Phil EF said: Exercised the up limit switch and started working. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.