Jump to content

JPI Oil Temperature Probe Question


LANCECASPER

Recommended Posts

Mine is where you have re-located yours too - good job :-)
OilProbe.jpg.1189940ea45efeb8213eab6e8a54c8e9.jpg
Wire routes with the unconnected prop heater underneath the barrels to go through the firewall on the starboard side with the starter cable (and the rest of the JPI leads)
Not a great picture - EGT and cylinder probes are on the stand-offs with the lower HT leads, Oli temp just visible at the back
OilProbeWire.jpg.577b19481d2b54e7a198f52d3c1e9b4b.jpg

You are not suppose to tie the wires together with the ignition wires, it can cause erratic readings.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.