RobertGary1 Posted September 29, 2018 Report Share Posted September 29, 2018 I’ve glued my mixture control end several times but it broke again. Looks like it would be trivial to 3D print if someone had the file. -Robert Quote Link to comment Share on other sites More sharing options...
Hephaestus Posted September 29, 2018 Report Share Posted September 29, 2018 Got a decent camera and some pictures? If it's not too nasty I'll draw it up. 1 Quote Link to comment Share on other sites More sharing options...
Bartman Posted September 29, 2018 Report Share Posted September 29, 2018 A while back someone posted some made of aluminum that were anodized the proper color and shape. They looked nice. 2 Quote Link to comment Share on other sites More sharing options...
Marauder Posted September 29, 2018 Report Share Posted September 29, 2018 A while back someone posted some made of aluminum that were anodized the proper color and shape. They looked nice. That would be me. A former MooneySpace member made it to my specifications. Sent from my iPhone using Tapatalk Pro 3 Quote Link to comment Share on other sites More sharing options...
Marauder Posted September 29, 2018 Report Share Posted September 29, 2018 I just bumped another thread where another member made one back in April. Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
RobertGary1 Posted September 29, 2018 Author Report Share Posted September 29, 2018 2 hours ago, Marauder said: That would be me. A former MooneySpace member made it to my specifications. Sent from my iPhone using Tapatalk Pro Do you think he’d still make some ? Quote Link to comment Share on other sites More sharing options...
Marauder Posted September 29, 2018 Report Share Posted September 29, 2018 Do you think he’d still make some ? I got to see if I can find his name first. It was over 3 years ago and he had just sold his Mooney. He also made a bunch of us those fire extinguisher holders. I’ll look when I get back to my PC. Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
Hephaestus Posted September 29, 2018 Report Share Posted September 29, 2018 (edited) Like I said - If you guys get me a picture of the lever and dimensions on it - and an idea of what you want the handle to be (I see a few versions) it's only a few minutes in CAD to draw it up and 45-1hr to print it... There's a mixture lever based off a 60s money pic I found... Guessing the lever is about 1" flatbar with a 1/4" hole? Fusion 360 says I spent 8 minutes on it... With rendering. 38 minute print with a .8 nozzle on my railcore. Edited September 30, 2018 by Hephaestus 1 Quote Link to comment Share on other sites More sharing options...
Hephaestus Posted October 1, 2018 Report Share Posted October 1, 2018 Bored waiting on phone calls today - does it show? Quote Link to comment Share on other sites More sharing options...
Stephen Posted October 4, 2018 Report Share Posted October 4, 2018 On 10/1/2018 at 5:14 PM, Hephaestus said: Bored waiting on phone calls today - does it show? Looks great, what about a maple leaf shaped mixture 1 Quote Link to comment Share on other sites More sharing options...
Hank Posted October 4, 2018 Report Share Posted October 4, 2018 10 minutes ago, Stephen said: Looks great, what about a maple leaf shaped mixture Some people 3D print. I prefer wood, because I can carve things that are difficult to draw . . . This is a radio volume knob for a friend's Mercedes with his name carved into it. Quote Link to comment Share on other sites More sharing options...
Stephen Posted October 4, 2018 Report Share Posted October 4, 2018 39 minutes ago, Hank said: Some people 3D print. I prefer wood, because I can carve things that are difficult to draw . . . This is a radio volume knob for a friend's Mercedes with his name carved into it. Very cool! Quote Link to comment Share on other sites More sharing options...
Hephaestus Posted October 4, 2018 Report Share Posted October 4, 2018 1 hour ago, Stephen said: Looks great, what about a maple leaf shaped mixture Nothing's impossible 1 hour ago, Hank said: Some people 3D print. I prefer wood, because I can carve things that are difficult to draw . . . This is a radio volume knob for a friend's Mercedes with his name carved into it. But when you can print in wood filament... The details can get even finer Quote Link to comment Share on other sites More sharing options...
Hank Posted October 4, 2018 Report Share Posted October 4, 2018 1 minute ago, Hephaestus said: Nothing's impossible But when you can print in wood filament... The details can get even finer But it's still plastic, no grain, reduced strength, colors from dye. The radio knob is natural colored paduak from Central America, with a little paint used to bring out the carving. Posted here, there's much more detail visible than when I carved it with magnification. Could have done better cleaning up the paint . . . . . It bled too much into the grain . . . . . Quote Link to comment Share on other sites More sharing options...
Hephaestus Posted October 4, 2018 Report Share Posted October 4, 2018 Takes paint, stains, sands carves and glues like wood. I've been playing with the graining, the 3d print actually adds a grain so to speak in layer lines, so it's fairly easy to create a grain texture appearance. Quote Link to comment Share on other sites More sharing options...
RobertGary1 Posted October 4, 2018 Author Report Share Posted October 4, 2018 Got a picture. Since we no longer carry coins for size reference I used a aaa battery. 1 Quote Link to comment Share on other sites More sharing options...
FloridaMan Posted October 4, 2018 Report Share Posted October 4, 2018 You should have a caliper to measure things. https://www.amazon.com/Anytime-Tools-Caliper-Reading-Standard/dp/B00B5XJW7I/ref=sr_1_8?ie=UTF8&qid=1538671508&sr=8-8&keywords=caliper Quote Link to comment Share on other sites More sharing options...
Hephaestus Posted October 4, 2018 Report Share Posted October 4, 2018 (edited) Is that the generally preferred design? Or did someone have an idea that they'd prefer? Hexagonal is easy, just the question of stock or something nicer. Edited October 4, 2018 by Hephaestus Quote Link to comment Share on other sites More sharing options...
RobertGary1 Posted October 4, 2018 Author Report Share Posted October 4, 2018 33 minutes ago, Antares said: You should have a caliper to measure things. https://www.amazon.com/Anytime-Tools-Caliper-Reading-Standard/dp/B00B5XJW7I/ref=sr_1_8?ie=UTF8&qid=1538671508&sr=8-8&keywords=caliper Oh, sure I could measure it with a caliper. I wasn't sure what level of precision he wanted. -Robert Quote Link to comment Share on other sites More sharing options...
Hephaestus Posted October 4, 2018 Report Share Posted October 4, 2018 Calipers are good my favorite tool next to my 60s vintage slide rule. I'm a disturbed individual I know... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.