AGL Aviation Posted September 17, 2018 Report Share Posted September 17, 2018 It's that time of year again!!! The future schedule will start to slow down a little bit. So far we have very little written on our board for October Last year's slow time (which was our fault) brought us very close to shutting our doors. We certainly do not want to be in that same position again. If you schedule some work with us from October 1st to December 31st, we will give a 10% discount on ALL LABOR. Help us keep our doors open this winter! Sent from my iPhone using Tapatalk Pro 4 Quote Link to comment Share on other sites More sharing options...
Piloto Posted September 20, 2018 Report Share Posted September 20, 2018 On 9/17/2018 at 7:24 PM, AGL Aviation said: It's that time of year again!!! The future schedule will start to slow down a little bit. So far we have very little written on our board for October Last year's slow time (which was our fault) brought us very close to shutting our doors. We certainly do not want to be in that same position again. If you schedule some work with us from October 1st to December 31st, we will give a 10% discount on ALL LABOR. Help us keep our doors open this winter! Sent from my iPhone using Tapatalk Pro Is that discount on top of a Trump Senior Discount. José 1 Quote Link to comment Share on other sites More sharing options...
AGL Aviation Posted September 20, 2018 Author Report Share Posted September 20, 2018 Is that discount on top of a Trump Senior Discount. José We work in general aviation, we don't give senior discounts Sent from my iPhone using Tapatalk Pro 1 2 Quote Link to comment Share on other sites More sharing options...
Guest Posted September 20, 2018 Report Share Posted September 20, 2018 (edited) Hey! This is a politics free zone. Clarence Edited September 20, 2018 by M20Doc Quote Link to comment Share on other sites More sharing options...
Fookz92 Posted September 21, 2018 Report Share Posted September 21, 2018 On 9/17/2018 at 7:24 PM, AGL Aviation said: It's that time of year again!!! The future schedule will start to slow down a little bit. So far we have very little written on our board for October Last year's slow time (which was our fault) brought us very close to shutting our doors. We certainly do not want to be in that same position again. If you schedule some work with us from October 1st to December 31st, we will give a 10% discount on ALL LABOR. Help us keep our doors open this winter! Sent from my iPhone using Tapatalk Pro Where are you based at? Location? What services do you offer? Details? Quote Link to comment Share on other sites More sharing options...
kpaul Posted September 21, 2018 Report Share Posted September 21, 2018 19 minutes ago, Fookz92 said: Where are you based at? Location? What services do you offer? Details? https://www.aglaviation.com/agl-home Located @ KMRN, Foothills Regional Airport in Morgantown, NC, near Charlotte. They are a Mooney Service Center. 3 Quote Link to comment Share on other sites More sharing options...
AGL Aviation Posted September 21, 2018 Author Report Share Posted September 21, 2018 We're based out of KMRN (Morganton, NC). We offer a wide arrange of services, you can visit our website www.aglaviation.com to see a more comprehensive list. Or, you can ask us if you have something specific in mind - Lynn is very honest as to whether he's capable. Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
glafaille Posted September 21, 2018 Report Share Posted September 21, 2018 (edited) Might be a good time to get into ADS-B installs. At least the easiest ones, GDL82 or Stratus ESG. Edited September 21, 2018 by glafaille Quote Link to comment Share on other sites More sharing options...
AGL Aviation Posted September 21, 2018 Author Report Share Posted September 21, 2018 Lynn has done a couple so far with 2 scheduled for the winter Sent from my iPhone using Tapatalk Pro 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.