xcrmckenna Posted August 13, 2018 Report Share Posted August 13, 2018 I have an IO-360 A3B6D and would like to replace the ignition harness. I have Tempest fine wire plugs. And would like a harness with the option for 90 degree boots. Other threads people suggest the yellow Airboss AERO but they have been out of stock on their website for the last two months. http://www.aeroinstock.com/p-27317-airboss-harness-yellow.aspx?keyword=10-821414-6r-e What is my best option? Thanks for any help. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bartman Posted August 13, 2018 Report Share Posted August 13, 2018 I went with the Kelly harness from QAA and I am pleased. However, it appears to be a one size fits all product because some of the wires are way too long and we just tied them up behind the Dual Magneto. I'm no expert and this may be the norm, but it's not what I expected. Otherwise it had more than adequate attachment hardware and performs well. 1 Quote Link to comment Share on other sites More sharing options...
carusoam Posted August 13, 2018 Report Share Posted August 13, 2018 See if we can point Byron this way... come in @jetdriven...? Best regards, -a- Quote Link to comment Share on other sites More sharing options...
xcrmckenna Posted August 13, 2018 Author Report Share Posted August 13, 2018 See if we can point Byron this way... come in [mention=7887]jetdriven[/mention]...? Best regards, -a- I should have him on speed dial. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Hank Posted August 13, 2018 Report Share Posted August 13, 2018 I bought mine from Kelly on the phone, to make sure I got the right one. Got 90° tips installed rather than the kit to install them muself--it was actually cheaper! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.