Jim Peace Posted July 23, 2018 Report Share Posted July 23, 2018 I see on the 930 and higher systems you can display time of day in the blue margin. has anyone been able to do this on a 900? Quote Link to comment Share on other sites More sharing options...
Marauder Posted July 23, 2018 Report Share Posted July 23, 2018 I see on the 930 and higher systems you can display time of day in the blue margin. has anyone been able to do this on a 900? I’ve got a fairly recent version of the firmware and I don’t see it. I think there is room for it to be displayed. Be nice if they did include it. Sent from my iPad using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted July 23, 2018 Report Share Posted July 23, 2018 I assume y’all have a clock already since IFR requires it? You can see it if you go into program mode.I’d would like to see the hobbs,tach time displayed. Quote Link to comment Share on other sites More sharing options...
Jim Peace Posted July 23, 2018 Author Report Share Posted July 23, 2018 15 minutes ago, teejayevans said: I assume y’all have a clock already since IFR requires it? You can see it if you go into program mode. I’d would like to see the hobbs,tach time displayed. Yes a clock is in my panel. I would like to remove it. Hobbs time is easily displayed when you want it. But I agree it would be nice if the unit had a scratch pad where you could display anything you wanted. Quote Link to comment Share on other sites More sharing options...
EricJ Posted July 23, 2018 Report Share Posted July 23, 2018 I * think* my 900 cycles through time of day in the rolling display, and I know it knows what time it is because the datalogs show time of day for the samples. I think mine gets time information from the GPS (IFD). Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted July 23, 2018 Report Share Posted July 23, 2018 I * think* my 900 cycles through time of day in the rolling display, and I know it knows what time it is because the datalogs show time of day for the samples. I think mine gets time information from the GPS (IFD). I think it only cycles through what’s being displayed. Quote Link to comment Share on other sites More sharing options...
EricJ Posted July 23, 2018 Report Share Posted July 23, 2018 50 minutes ago, teejayevans said: I think it only cycles through what’s being displayed. Mine cycles through stuff I wouldn't see otherwise, like mpg estimate, etc. That's not displayed anywhere else. I've only had it a couple of months and haven't sorted out everything it is doing or why yet. Quote Link to comment Share on other sites More sharing options...
Jim Peace Posted July 23, 2018 Author Report Share Posted July 23, 2018 just received this email back from EDM support: Jim,Not enough room to display time on the 900. Tim SullivanCustomer SupportJ.P. Instruments Inc.3185-B Airway Ave.Costa Mesa, CA 92626 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.