Starter replaced

[rbridges]

13 hours ago, xcrmckenna said:

What is this an Abbot and Costello routine???


Sent from my iPhone using Tapatalk

 

[Guest]

4 hours ago, teejayevans said:

Good eye, I still can’t see it looking at the pictures.

I guess I should rephrase it.  The one in the picture is not cracked, just a deep groove for now.  If it progresses to a crack it doesn’t spray all of the oil out, it seeps out making quite a mess.

Clarence

[Mcstealth]

23 hours ago, rbridges said:

 

 thank you. A picture is indeed worth a thousand Words

[rbridges]

30 minutes ago, Mcstealth said:

 thank you. A picture is indeed worth a thousand Words

I thought everyone had seen Airplane at one point or another.  It's a classic.

[Mcstealth]

Oh Stewardess, I speak Jive......

[Shadrach]

On 7/21/2018 at 8:56 PM, M20Doc said:

Two things I noticed in your pictures.  The oil return line for cylinder 2 looks close to the baffle.  There is an SB from Mooney with instructions for trimming the baffle to improve clearance.  I’d also add a bead of silicone between the baffle and start nose case to seal the air gap.

Clarence

When I replaced my starter a few months ago, I had to address this.  The baffle had shifted and the return line was slightly chaffed.