RobertGary1 Posted June 29, 2018 Report Share Posted June 29, 2018 Mooney uses a different (?old?) part number format but is the REM3-4-2 that the Mooney manual talks about the Heim M34-14M (with magaflux)? -Robert Quote Link to comment Share on other sites More sharing options...
Igor_U Posted June 29, 2018 Report Share Posted June 29, 2018 5 hours ago, RobertGary1 said: Mooney uses a different (?old?) part number format but is the REM3-4-2 that the Mooney manual talks about the Heim M34-14M (with magaflux)? -Robert Robert, Where in IPC do you see that number (REM3-4-2)? Your F is newer then mine. I've replaced few rod ends in the past and remember doing some research at the time (like, Heim change the design of part and kept same p/n) but my '67F IPC lists M34-14 on multiple places. Heim catalog (you can download it from RBC bearing website) lists M34-14M as current but I can't find cross-reference to REM p/ns. I think, if you are ordering parts, M34-14M is the one to go or it's Aurora p/n equivalent since Aurora bearings are much cheaper. Quote Link to comment Share on other sites More sharing options...
smwash02 Posted June 29, 2018 Report Share Posted June 29, 2018 Here is the part of LASAR. They may know. Quote Link to comment Share on other sites More sharing options...
Igor_U Posted June 29, 2018 Report Share Posted June 29, 2018 (edited) Yes, I remember the part now: https://lasar.com/hardware-bearings/rod-end-bearing-steering-link-rem3-4-2 It says it's equivalent to MM-3M-21 and REM was not Heim p/n IIRC. You probably need this for your now wheel steering, right? I remember buying it as NOS from some big parts dealer, including some other parts I needed from my rebuild. Edited June 29, 2018 by Igor_U Quote Link to comment Share on other sites More sharing options...
RobertGary1 Posted June 29, 2018 Author Report Share Posted June 29, 2018 The reason I ask is because Aircraft Spruce's price on the M34-14M is a fair amount less than lasar's price on the REM3-4.2. I though Heim might have a cross reference. -Robert Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.