Andy95W Posted December 5, 2017 Report Share Posted December 5, 2017 Chris- please tell Bruce that Andy says hello and I hope he's enjoying NJ *EDIT- Pennsylvania*- I'm in Fort Myers right now! Edit- duh, sorry, don't know why I said NJ 1 Quote Link to comment Share on other sites More sharing options...
Marauder Posted December 5, 2017 Author Report Share Posted December 5, 2017 Chris- please tell Bruce that Andy says hello and I hope he's enjoying NJ- I'm in Fort Myers right now! Pennsylvania has assaulted Bruce. First it was the frost due to the 25° temp and then the mushroom farms assaulted his olfactory senses by layering in a nice putrid odor held close to ground level by a fog. I do think it was funny that the guy from Wilmar Minnesota was asking the guy from Buffalo New York to turn the propane heater on because he was cold. I’ll pass along your hello.Sent from my iPad using Tapatalk Pro 1 1 Quote Link to comment Share on other sites More sharing options...
Marauder Posted December 5, 2017 Author Report Share Posted December 5, 2017 No, Bruce is a good guy. Family has used his services as a MSC for a few years. However, I have everything I need (already replaced the screws and made repairs to other areas) minus the Al tape and I didn’t want to bother him to ask about splitting up his kit. Up to this point I have not addressed the larger cracks which will be aided with the tape. He buys it from zoro.com. It comes in a large roll, so if you only need a smaller section, you might need to connect with him directly. This aluminum he is using is pretty impressive. Able to contour it to fix a piece of plastic, yet rigid enough to add strength to the plastic.Sent from my iPad using Tapatalk Pro 1 Quote Link to comment Share on other sites More sharing options...
Bob_Belville Posted December 5, 2017 Report Share Posted December 5, 2017 8 hours ago, Marauder said: He buys it from zoro.com. It comes in a large roll, so if you only need a smaller section, you might need to connect with him directly. This aluminum he is using is pretty impressive. Able to contour it to fix a piece of plastic, yet rigid enough to add strength to the plastic. Sent from my iPad using Tapatalk Pro Zoro is a good site. It has had the best price for TriFlow, CO detectors, shop tools... Quote Link to comment Share on other sites More sharing options...
N6758N Posted December 5, 2017 Report Share Posted December 5, 2017 More pictures please Chris @Marauder Quote Link to comment Share on other sites More sharing options...
Marauder Posted December 5, 2017 Author Report Share Posted December 5, 2017 More pictures please Chris [mention=9886]Marauder[/mention] I’m working on some videos with him on the technique. Will post them on YouTube when I have a chance to edit them. Sent from my iPad using Tapatalk Pro 1 Quote Link to comment Share on other sites More sharing options...
Marauder Posted December 7, 2017 Author Report Share Posted December 7, 2017 Told Bruce this morning I am having a hard time remembering where the Philly airport is. Sent from my iPhone using Tapatalk Pro 1 Quote Link to comment Share on other sites More sharing options...
Ned Gravel Posted December 8, 2017 Report Share Posted December 8, 2017 5 hours ago, Marauder said: Told Bruce this morning I am having a hard time remembering where the Philly airport is. Sent from my iPhone using Tapatalk Pro Where is Philly? That's easy. Just find the airport where they send you around in ever decreasing circles to avoid the heavy iron. 1 Quote Link to comment Share on other sites More sharing options...
N6758N Posted December 8, 2017 Report Share Posted December 8, 2017 I stopped by last night to check in on the progress, WOW! It looks awesome. Chris @Marauder will have one heck of a nice interior when it is all finished up. The quality of the new plastics and the simple way they attach is amazing, and making me pretty darn envious. Bruce reminds me a bit of a friendly mad scientist, the stuff he is doing is all modern and with new materials/techniques that Mooney could have only dreamed of when they built this F. I really hope he is able to sell more of these interiors to us Mooniacs! 2 Quote Link to comment Share on other sites More sharing options...
PTK Posted December 8, 2017 Report Share Posted December 8, 2017 If only Bruce would get rid of those old freightliner looking wood armrests! 1 Quote Link to comment Share on other sites More sharing options...
mike_elliott Posted December 8, 2017 Report Share Posted December 8, 2017 2 hours ago, PTK said: If only Bruce would get rid of those old freightliner looking wood armrests! One doesn't have to purchase the optional wood armrest if one thinks they are old freightliner looking but could get the optional leather ones instead if that would make one happier, or get none at all 3 1 Quote Link to comment Share on other sites More sharing options...
Marauder Posted December 9, 2017 Author Report Share Posted December 9, 2017 One doesn't have to purchase the optional wood armrest if one thinks they are old freightliner looking but could get the optional leather ones instead if that would make one happier, or get none at all I like those wood arm rests!! And if I ever didn’t like those arm rests, Bruce’s mechanism for attachment makes it easy to remove and change them over to something else. Sent from my iPhone using Tapatalk Pro 1 Quote Link to comment Share on other sites More sharing options...
Danb Posted December 9, 2017 Report Share Posted December 9, 2017 They look pretty nice, the interior parts are first rate, great wat to modernize the interior. 2 Quote Link to comment Share on other sites More sharing options...
Hank Posted December 9, 2017 Report Share Posted December 9, 2017 7 hours ago, mike_elliott said: One doesn't have to purchase the optional wood armrest if one thinks they are old freightliner looking but could get the optional leather ones instead if that would make one happier, or get none at all Some people like quality furnishings, some just like to fuss . . . I'd love to have Bruce's interior myself, armrests and all. Got some nice cherry downstairs to make them out of, too. Quote Link to comment Share on other sites More sharing options...
jetdriven Posted December 9, 2017 Report Share Posted December 9, 2017 How much interior room is gained if you have his armrests? Quote Link to comment Share on other sites More sharing options...
aviatoreb Posted December 9, 2017 Report Share Posted December 9, 2017 17 hours ago, jetdriven said: How much interior room is gained if you have his armrests? I'm tall and I have Bruce's interior system - I can't quantify it but I can say it is definitely noticeable and nice. 1 Quote Link to comment Share on other sites More sharing options...
Marauder Posted December 13, 2017 Author Report Share Posted December 13, 2017 Just a couple of pictures after the wife approval review. Once I get the new rugs in, I will post some glamour shots. I’m impressed with the Spatial Design concept. Spent a lot of time speaking with Bruce about the future of his product and I know he would like someone to take over the mission. Maybe one of you talented folks has an interest.I will provide some links to YouTube videos on the technique as soon as I get time to edit them.Sent from my iPad using Tapatalk Pro 5 Quote Link to comment Share on other sites More sharing options...
aviatoreb Posted December 13, 2017 Report Share Posted December 13, 2017 8 hours ago, Marauder said: Just a couple of pictures after the wife approval review. Once I get the new rugs in, I will post some glamour shots. I’m impressed with the Spatial Design concept. Spent a lot of time speaking with Bruce about the future of his product and I know he would like someone to take over the mission. Maybe one of you talented folks has an interest. I will provide some links to YouTube videos on the technique as soon as I get time to edit them. Sent from my iPad using Tapatalk Pro Nice - looks a lot like the inside of my airplane! Only I don't have an aspen. Love the pockets too eh - its a very very clean and more room look. 2 Quote Link to comment Share on other sites More sharing options...
Vlakvark Posted December 22, 2017 Report Share Posted December 22, 2017 On 2017-12-13 at 7:33 AM, Marauder said: Just a couple of pictures after the wife approval review. Once I get the new rugs in, I will post some glamour shots. I’m impressed with the Spatial Design concept. Spent a lot of time speaking with Bruce about the future of his product and I know he would like someone to take over the mission. Maybe one of you talented folks has an interest. I will provide some links to YouTube videos on the technique as soon as I get time to edit them. Sent from my iPad using Tapatalk Pro Any thing on the youtube clips. JT Quote Link to comment Share on other sites More sharing options...
carusoam Posted December 22, 2017 Report Share Posted December 22, 2017 Those panels sure are fancy! What's behind the circular access panel? Just wondering.... -a- Quote Link to comment Share on other sites More sharing options...
milotron Posted January 2, 2018 Report Share Posted January 2, 2018 Hi @Marauder Did you end up making some youtube videos? I am about to redo my panels and would love to see the crack/warp repair techniques. Thanks, iain Quote Link to comment Share on other sites More sharing options...
Marauder Posted January 2, 2018 Author Report Share Posted January 2, 2018 Hi Iain. Haven’t had the time to edit and post them. Been working on rebuilding my snow plow pump motor and the usual holiday stuff. Hopefully this weekend. Sent from my iPad using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
rbridges Posted January 2, 2018 Report Share Posted January 2, 2018 1 hour ago, Marauder said: Hi Iain. Haven’t had the time to edit and post them. Been working on rebuilding my snow plow pump motor and the usual holiday stuff. Hopefully this weekend. Sent from my iPad using Tapatalk Pro what's a snow plow? Must be one of those Northern things. 5 Quote Link to comment Share on other sites More sharing options...
Hank Posted January 3, 2018 Report Share Posted January 3, 2018 7 hours ago, Marauder said: Been working on rebuilding my snow plow . . . How deep do you plow with it, and what crop are you planting this time of year?? 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.