Bryan Posted September 5, 2017 Report Share Posted September 5, 2017 (edited) In great condition, 2 control wheel shafts for our M20 birds. P/N: 710064 (-503 pilot, -504 copilot)SOLD Edited September 6, 2017 by Bryan sold Quote Link to comment Share on other sites More sharing options...
Jerry Pressley Posted September 6, 2017 Report Share Posted September 6, 2017 yours are 231? aren't they bigger and improvement over earlier ones? only curious jerryP Quote Link to comment Share on other sites More sharing options...
Bryan Posted September 6, 2017 Author Report Share Posted September 6, 2017 I had actually bought these to replace the shafts on the thinner walled 1967 M20F but ended up not working out. They are part number for the 231, however, they just sold offsite. Thanks. Quote Link to comment Share on other sites More sharing options...
gsxrpilot Posted September 6, 2017 Report Share Posted September 6, 2017 I bought some from someone here on MooneySpace when I was a rank newbie. They were supposed to fit my C. Sitting in Don Maxwell's office, I got a lesson in all the various control shafts that have been used by Mooney over the years. They are very specific to type. I think the shafts I bought were for a J. Needless to say, they weren't useable in my C. Lesson learned, check the part numbers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.