milotron Posted August 14, 2017 Report Share Posted August 14, 2017 Is replacement of baffle seals considered to be under the scope of an owner repair item? How about repair of baffle seals? Any opinions? Thanks iain Quote Link to comment Share on other sites More sharing options...
Andy95W Posted August 14, 2017 Report Share Posted August 14, 2017 Under owner maintenance, you are allowed to replace spark plugs. Some baffling removal may be required to do that, so in that case, yes. Otherwise, no. But it's not rocket science and most mechanically adept people can do it. Please ask for help if it's your first time, though. Quote Link to comment Share on other sites More sharing options...
RLCarter Posted August 14, 2017 Report Share Posted August 14, 2017 I'm sure Canadian regulations differ from the FAA's regs, but I don't believe the FAA considers baffles and/or seals to be "Preventative Maintinance" Quote Link to comment Share on other sites More sharing options...
Andy95W Posted August 14, 2017 Report Share Posted August 14, 2017 Oops, sorry, didn't notice that. YMMV. 1 Quote Link to comment Share on other sites More sharing options...
milotron Posted August 14, 2017 Author Report Share Posted August 14, 2017 The Canadian regs read similarly and list elementary maintenance specifically. I thought it could conceivably fall under this of this passage: (4) repair of non-structural fairings, cover plates and cowlings, on small privately operated aircraft;(amended 2004/03/01) More than capable of doing it, but want to make sure I am on the right side of the regs. Iain Quote Link to comment Share on other sites More sharing options...
carusoam Posted August 14, 2017 Report Share Posted August 14, 2017 Are you swapping out parts like mounting purchased baffle seals from Guy with the holes already located properly or something like that? Stuff a pilot can't possibly get wrong... Or are you cutting and fitting and all the details from scratch... an infinite possibility of getting something important out of skew..? If I were embarking on this. Getting the right seals, latest silicone material, cut and ready to install, would be important to me. Missing by 1/8" would take doing this over. The risk of getting it wrong is an overheat situation that might be hard to find... On the legality issue... Using the brakes as an example, there is a lot of work surrounding and involved in changing out the pads... Some PP thoughts only... Best regards, -a- 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted August 14, 2017 Report Share Posted August 14, 2017 A reasonable AME and a somewhat skillful owner should be able to workout baffle seal replacement, I know I could. Clarence Quote Link to comment Share on other sites More sharing options...
milotron Posted August 14, 2017 Author Report Share Posted August 14, 2017 9 hours ago, carusoam said: Are you swapping out parts like mounting purchased baffle seals from Guy with the holes already located properly or something like that? Stuff a pilot can't possibly get wrong... Or are you cutting and fitting and all the details from scratch... an infinite possibility of getting something important out of skew..? If I were embarking on this. Getting the right seals, latest silicone material, cut and ready to install, would be important to me. Missing by 1/8" would take doing this over. The risk of getting it wrong is an overheat situation that might be hard to find... I was thinking of the GeeBee route. Heard many good things about them. I am going to try and correct the issues I have first, which really amounts to a couple of the fixed fasteners bosses deflecting the baffles, plus the seals are not tight against the cowl going around the corners at the top of the cowl. Need to find a way to get more tension into the material to hold it up. There were some suggestions regarding tyrap material or metal backing that I will try first. Quote Link to comment Share on other sites More sharing options...
LANCECASPER Posted August 14, 2017 Report Share Posted August 14, 2017 26 minutes ago, milotron said: I was thinking of the GeeBee route. Heard many good things about them. I am going to try and correct the issues I have first, which really amounts to a couple of the fixed fasteners bosses deflecting the baffles, plus the seals are not tight against the cowl going around the corners at the top of the cowl. Need to find a way to get more tension into the material to hold it up. There were some suggestions regarding tyrap material or metal backing that I will try first. Definitely go the Gee Bee route - great quality product and cuts a lot of time and frustration out of the job. 1 Quote Link to comment Share on other sites More sharing options...
Danb Posted August 14, 2017 Report Share Posted August 14, 2017 I ended up buying the materials from Aircraft spruce and replaced most of mine, being close to useless at mechanical stuff it ended up being an easy process. I used the original as a template shaped and cut the stuff then installed. I didn't spend much more than $100 and have plenty left. If I failed I was going the BG route. My temps went down by 20-30* 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted August 17, 2017 Report Share Posted August 17, 2017 On August 14, 2017 at 10:07 AM, milotron said: I was thinking of the GeeBee route. Heard many good things about them. I am going to try and correct the issues I have first, which really amounts to a couple of the fixed fasteners bosses deflecting the baffles, plus the seals are not tight against the cowl going around the corners at the top of the cowl. Need to find a way to get more tension into the material to hold it up. There were some suggestions regarding tyrap material or metal backing that I will try first. I can assure you that you won't be disappointed with the Gee Bee baffle seals. He provides more than enough rivets to attach to the metal and lots of fasteners to join the seals together. Clarence Quote Link to comment Share on other sites More sharing options...
KSMooniac Posted August 17, 2017 Report Share Posted August 17, 2017 Buy the Gee Bee kit and you'll be very happy.Sent from my LG-US996 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
milotron Posted August 18, 2017 Author Report Share Posted August 18, 2017 I have been corresponding with Guy the last couple of days and will go this route. I wanted to touch base with my mechanic so he is not surprised when he sees them at the next annual in 6 months. I like working with him and don't want to get him pissed off with me doing things like this. iain Quote Link to comment Share on other sites More sharing options...
Tommy Posted August 18, 2017 Report Share Posted August 18, 2017 I can vouch for Gee Bee. Perfect fit and comes with everything you need. And I kid you not, on my engine, it made at least 25-30degree difference! Money well spent! Quote Link to comment Share on other sites More sharing options...
carusoam Posted August 18, 2017 Report Share Posted August 18, 2017 Primo Customer education & support, Guy! Thanks for sharing so many details. Best regards, -a- Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.