Jump to content

Engine Bay SCAT


Recommended Posts

All the tubes in my C got replaced including all the heat hose in the cockpit....

It was measure twice and buy once....

It isn't terrible to have too much or too little.  

Adding length to the tube may not be ideal, but it can be done...

getting access to the tubes is a pain....

Best regards,

-a-

Link to comment
Share on other sites

I replaced all the SCAT in the entire plane 3-4 years ago and this was my order:

 
33   0 05-29905 SCAT-5 DUCTING 1 1/4" 6.700 221.10
22   0 05-29908 SCAT-8 DUCTING 2" 7.550 166.10

The 5 is the stuff through the cockpit, which was CAT and crumbling. Also in the cockpit are a couple SCAT8 of no more than 2-3 feet total.

I probably have 5-10 feet left of the SCAT8 from my work and I had to replace the long one because it rubbed on the exhaust. 15 feet would probably give you enough to do it with a buffer for error. Though looking at your photo you might have a different configuration from me. I only had 3 runs to make FWF. ~1', ~5`, ~4` conservatively.

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.