Jump to content

S-tec 30 autopilot system, brand new in box, complete.

jclemens

By jclemens
in Avionics / Parts Classifieds

 Share

Recommended Posts

jclemens Community Regular

jclemens

Posted
Posted (edited)

I have a brand new, old stock, S-tec (Genesys now) System 30 autopilot for sale. This is a rate based 2 axis autopilot with altitude hold. It is complete. All servos, brackets, harness, turn coordinator, etc. It has never been installed or used for anything, or completely unpackaged for that matter, and comes with all paperwork and documentation required......wait for it.....wait.....to install it in a Grumman AG5B. We are an S-tec dealer, this was ordered quite a while ago for a customer and never installed. This system can be modified as needed and new STC paperwork issued for numerous 28V aircraft. The cost is varied, it requires the autopilot to be sent back to Genesys and modified to be the part numbers required for that installation, an install kit containing the proper brackets and harness, and a new STC transferred to the aircraft. It can also be installed in an Experimental aircraft as is, as long as it's similar to a Grumman Tiger. It would work great in any 28V RV or the like. This system lists for $11989.00. If you own a Grumman AG5B Tiger or an experimental, I will sell you this one installed for $9000.00 provided you bring the plane to KDAB. If you want it for installation elsewhere, $7500.00 plus shipping to you.

IMG_1810.JPG

IMG_1811.JPG

IMG_1812.JPG

IMG_1813.JPG

IMG_1814.JPG

IMG_1815.JPG

IMG_1816.JPG

IMG_1817.JPG

Edited by jclemens
added photos
  • Like 1
  • Thanks 1
Link to comment
Share on other sites
cliffy Grand Master

cliffy

Posted
Posted

Wait for Sun n Fun and then the big one in Oshkosh Should be some great announcements then. It's really not too far away. 

The new digital autopilots being worked up for STCs are much easier to install (lower cost) and have features none of the legacy ones have.

Go look at Trio autopilots and their Pro model for instance.

http://www.trioavionics.com/ProPilot.htm

Link to comment
Share on other sites
aviatoreb Grand Master

aviatoreb

Posted
Posted
1 hour ago, cliffy said:

Wait for Sun n Fun and then the big one in Oshkosh Should be some great announcements then. It's really not too far away. 

The new digital autopilots being worked up for STCs are much easier to install (lower cost) and have features none of the legacy ones have.

Go look at Trio autopilots and their Pro model for instance.

http://www.trioavionics.com/ProPilot.htm

What is that anti-advertisement for jclemens posted sale?!

  • Like 2
  • Thanks 2
Link to comment
Share on other sites
cliffy Grand Master

cliffy

Posted
Posted

Not at all, the OP was asking about a new A/P and talk was about the new ones coming out which this is. An Stec 30 ain't bad but it still needs extra stuff to install. I was just showing options

I have no connection with Trio, just think their A/Ps look like a good deal for our older airframes I'm looking at them

Link to comment
Share on other sites
Aerodon Mentor

Aerodon

Posted
Posted
On 2017-01-13 at 5:11 PM, cliffy said:

Wait for Sun n Fun and then the big one in Oshkosh Should be some great announcements then. It's really not too far away. 

The new digital autopilots being worked up for STCs are much easier to install (lower cost) and have features none of the legacy ones have.

Go look at Trio autopilots and their Pro model for instance.

http://www.trioavionics.com/ProPilot.htm

Not cool to pee on someone else parade.

  • Like 2
  • Thanks 2
Link to comment
Share on other sites
Marauder Grand Master

Marauder

Posted
Posted (edited)
2 hours ago, cliffy said:

Why would you think I'm trying to pee on someone elses parade?  The OIP was looking for options ? 

I really don't understand where you are coming from. 

Cliffy -- the original poster is trying to sell an autopilot. He created this thread to advertise it for sale. He also is an avionics installer. That is why comments were made about you peeing on someone's else parade. The guy is trying to make a living. 

Edited by Marauder
  • Thanks 2
Link to comment
Share on other sites
cliffy Grand Master

cliffy

Posted
Posted

OK My profound apologies!

I thought I was posting to something else where someone was looking for an A/P and didn't know what to get. Now I have to go search for that thread. 

Where I live (way out in the boonies) we have very slooow internet and quit possibly (and it does ) it got screwed up in changing pages etc.

I didn't go back to reread the OP so my bad. I just answered the notification. 

Again, no intent to rain on anyone's parade. In fact the A/P talked about sounds like a pretty good deal for someone. Brand new, never used. Lots better than a second hand one by far. I hope it sells fast for him. 

 

  • Like 1
Link to comment
Share on other sites
gsxrpilot Grand Master

gsxrpilot

Posted
Posted

There are a couple of planes for sale that need this. Personally I can't see spending any money on a Mooney that didn't come with an autopilot installed. And this is a good one for any of those B/C/D/E/F or even J that don't have a good autopilot.

  • Thanks 1
Link to comment
Share on other sites
Bob_Belville Grand Master

Bob_Belville

Posted
Posted
59 minutes ago, gsxrpilot said:

There are a couple of planes for sale that need this. Personally I can't see spending any money on a Mooney that didn't come with an autopilot installed. And this is a good one for any of those B/C/D/E/F or even J that don't have a good autopilot.

This is described as a 28V system. Our vintage Mooneys are all 14V so I don't know if it could be adapted...

  • Like 1
Link to comment
Share on other sites
N6758N Mentor

N6758N

Posted
Posted
59 minutes ago, gsxrpilot said:

There are a couple of planes for sale that need this. Personally I can't see spending any money on a Mooney that didn't come with an autopilot installed. And this is a good one for any of those B/C/D/E/F or even J that don't have a good autopilot.

This is a great autopilot and a good price. Unfortunately most Mooneys that this would be good for are 14v. By the time you sent this back to S-tec (Genesys) and bought the new paperwork as well as had everything modified to fit a Mooney, you would be better off buying a system new specifically for that aircraft. Good buy for someone with a Grumman or an experimental though.  

  • Like 1
Link to comment
Share on other sites
  • 2 years later...
kraoof Newbie

kraoof

Posted
Posted

Dear jclemens,

Please I have a Grumman Tiger with Autopilot STEC-40 with only Roll control. I am interested to have also the pitch control.

Can you please send me a copy of the servo-roll installation document in order to have an idea.

I am living in France and difficult to come and install it in your shop.

Please you can send me the information by Email : s.r.t@orange.fr

Kind regards,

Kosai

  • Thanks 1
Link to comment
Share on other sites
  • 2 weeks later...
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.