Marauder Posted February 28, 2018 Report Share Posted February 28, 2018 OK. I think these are as good as they get. Anyone wishing to order a set, PM me. I’m interested. PM sent. Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
Danb Posted February 28, 2018 Report Share Posted February 28, 2018 13 hours ago, Ah-1 Cobra Pilot said: OK. I think these are as good as they get. Anyone wishing to order a set, PM me. Real nice stuff CP Quote Link to comment Share on other sites More sharing options...
Rmag Posted February 28, 2018 Report Share Posted February 28, 2018 Is there any customization? For example recog lite? Quote Link to comment Share on other sites More sharing options...
aviatoreb Posted February 28, 2018 Report Share Posted February 28, 2018 On 2/22/2017 at 2:56 PM, "Chocks" said: Also, that is just tests. Final versions will be super clean. Creation in progress: IMG_4483.TRIM.MOV You win the Mooney space long running switch construction contest! Quote Link to comment Share on other sites More sharing options...
AH-1 Cobra Pilot Posted February 28, 2018 Report Share Posted February 28, 2018 2 hours ago, Rmag said: Is there any customization? For example recog lite? Sure. I just have to know what it needs to be. i.e. ROT BCN ? Quote Link to comment Share on other sites More sharing options...
AH-1 Cobra Pilot Posted February 28, 2018 Report Share Posted February 28, 2018 In addition to the ones shown, I will also make rotating beacon, master, and avionics master switches. Is there anything else? There is also the issue of condensing the lettering. What is best? ROT BCN ? AV MSTR or AV MASTER ? MASTER ??? Unless red proves to be essential, all will be off-white with black letters. Quote Link to comment Share on other sites More sharing options...
jetdriven Posted February 28, 2018 Report Share Posted February 28, 2018 18 hours ago, Ah-1 Cobra Pilot said: OK. I think these are as good as they get. Anyone wishing to order a set, PM me. A few of those look split on the bottom side. Can you confirm, the two on the top left and the one that’s second from the top right. Quote Link to comment Share on other sites More sharing options...
AH-1 Cobra Pilot Posted February 28, 2018 Report Share Posted February 28, 2018 4 hours ago, jetdriven said: A few of those look split on the bottom side. Can you confirm, the two on the top left and the one that’s second from the top right. I had not noticed that until you mentioned it. The one was split; must have been from lasing it, otherwise the paint would have covered the split. I will adjust my process to make sure that does not happen again. Quote Link to comment Share on other sites More sharing options...
wcb Posted March 1, 2018 Report Share Posted March 1, 2018 pm'd you Quote Link to comment Share on other sites More sharing options...
Oscar Avalle Posted April 4, 2018 Report Share Posted April 4, 2018 Just PM youSent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
gacoon Posted April 12, 2018 Report Share Posted April 12, 2018 Have you tried your switch with these guys for engraving: http://www.engravers.net/rocker-sw.html 1 Quote Link to comment Share on other sites More sharing options...
AH-1 Cobra Pilot Posted April 12, 2018 Report Share Posted April 12, 2018 10 hours ago, gacoon said: Have you tried your switch with these guys for engraving: I use a professional grade, 60 Watt, 36"x24"x12" capacity engraver at a local Innovation Studio. I doubt their equipment is any better. Just to let everyone know what someone has to go through to get things right, here is a picture of the tests, rejects, almost theres, etc. that add up over the course of the project. I also printed the orange fixture in the second picture that was used to hold the covers in place for the lasing. The second picture is the good covers I have remaining. 2 Quote Link to comment Share on other sites More sharing options...
AH-1 Cobra Pilot Posted September 13, 2018 Report Share Posted September 13, 2018 I am printing another batch of switch covers. A few people have previously PMed me to get a set, so I tried to let them know about this new effort. If anyone else wants a set, please let me know now, as this could be the last time I do this. Please spread the word far and wide. There are nine standard letterings that I will print, but if anyone wants something custom, I can do that, too. ELEV BOOST PITOT LDG NAV STROBE ROT AV MASTER TRIM PUMP HEAT LITE LITE LITE BCN MASTER 2 Quote Link to comment Share on other sites More sharing options...
Marauder Posted September 13, 2018 Report Share Posted September 13, 2018 I am printing another batch of switch covers. A few people have previously PMed me to get a set, so I tried to let them know about this new effort. If anyone else wants a set, please let me know now, as this could be the last time I do this. Please spread the word far and wide. There are nine standard letterings that I will print, but if anyone wants something custom, I can do that, too. ELEV BOOST PITOT LDG NAV STROBE ROT AV MASTER TRIM PUMP HEAT LITE LITE LITE BCN MASTER I certainly could use a set. Looking for:Master Radio Master or Av MasterBeacon or Rec LightStrobesNav LightsPitot HeatBoost BumpSent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
Stnelson903 Posted September 13, 2018 Report Share Posted September 13, 2018 How much are they and do they fit a M20k 231?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
johnmaher Posted September 13, 2018 Report Share Posted September 13, 2018 Hi Cobra Guy, What would it cost for a set of them? you can email me directly at the address below. Can I paypal to you? Last time we got a little lost in translation. J. Maher N3876H@gmail.com Quote Link to comment Share on other sites More sharing options...
AH-1 Cobra Pilot Posted September 13, 2018 Report Share Posted September 13, 2018 22 minutes ago, Stnelson903 said: How much are they and do they fit a M20k 231? 6 for $50 or 8 for $60. As far as I know, they will fit any Mooney with Klixon switches. Let me know which ones you want. Quote Link to comment Share on other sites More sharing options...
AH-1 Cobra Pilot Posted September 13, 2018 Report Share Posted September 13, 2018 (edited) 3 hours ago, Marauder said: I certainly could use a set. Looking for: Master Radio Master or Av Master Beacon or Rec Light Strobes Nav Lights Pitot Heat Boost Bump Sent from my iPhone using Tapatalk Pro I will send you a Boost Pump and all the others, unless you really want a Boost Bump. Edited September 13, 2018 by Ah-1 Cobra Pilot Quote Link to comment Share on other sites More sharing options...
Marauder Posted September 13, 2018 Report Share Posted September 13, 2018 I will send you a Boost Pump and all the others, unless you really want a Boost Bump. I’m a dirty old man, how else can I defend myself?Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
AH-1 Cobra Pilot Posted October 1, 2018 Report Share Posted October 1, 2018 Last Friday, I shipped all the covers that people PMed me about, and I still have some left. Let me know if you want any of these. 3 Quote Link to comment Share on other sites More sharing options...
Marauder Posted October 1, 2018 Report Share Posted October 1, 2018 Thanks for the update. Appreciate you making them for us.Sent from my iPad using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
rbridges Posted October 1, 2018 Report Share Posted October 1, 2018 On 9/13/2018 at 5:19 PM, Marauder said: I’m a dirty old man, how else can I defend myself? Sent from my iPhone using Tapatalk Pro admitting is half the battle. 1 Quote Link to comment Share on other sites More sharing options...
ziggysanchez Posted October 1, 2018 Report Share Posted October 1, 2018 @Ah-1 Cobra Pilot I sent you a PM. Quote Link to comment Share on other sites More sharing options...
Hephaestus Posted October 1, 2018 Report Share Posted October 1, 2018 5 hours ago, Ah-1 Cobra Pilot said: Last Friday, I shipped all the covers that people PMed me about, and I still have some left. Let me know if you want any of these. Damn those look really nice! FDM or SLA? Quote Link to comment Share on other sites More sharing options...
AH-1 Cobra Pilot Posted October 1, 2018 Report Share Posted October 1, 2018 FDM, with paint and laser engraving. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.