DonMuncy Posted February 25, 2016 Author Report Share Posted February 25, 2016 On 2/23/2016 at 2:18 PM, LANCECASPER said: I would I sent you a PM Quote Link to comment Share on other sites More sharing options...
LANCECASPER Posted February 25, 2016 Report Share Posted February 25, 2016 Just now, DonMuncy said: I sent you a PM I sent you a Paypal Quote Link to comment Share on other sites More sharing options...
FlyDave Posted February 25, 2016 Report Share Posted February 25, 2016 Don, I'm interested in them for a Bravo as well. Dave Quote Link to comment Share on other sites More sharing options...
mike_elliott Posted February 25, 2016 Report Share Posted February 25, 2016 On 2/22/2016 at 1:21 AM, DonMuncy said: The shade itself is a smoke colored plexiglass (It is possible it is Lexan, but I don't think so). I got it from a local plastic distributor here in Dallas. I'll be glad to get as specific as you like. I, too, have LASAR visors and one cracked. I got the material, made a template and turned me out a couple. I don't remember how much it cost, but it was probably under $15. If your source is too expensive, I can get it here and turn out one (or whatever you need) for the cost of the material and shipping. Don, might I suggest lexan, as I had the ultra bitchin' guaranteed to increase TAS 5kts LASAR visors on my F when I owned her, and the Plexiglas would tend to break easily around the mounting hardware and holes especially for the copilot side where it would be moved out of the way frequently for ingress. Quote Link to comment Share on other sites More sharing options...
82Mike Posted February 29, 2016 Report Share Posted February 29, 2016 Don, if you ever can get the concept to work count me in for my J. The OEM ones are bad, but hey they have the cool power chart on them lol Quote Link to comment Share on other sites More sharing options...
kevinw Posted February 29, 2016 Report Share Posted February 29, 2016 Count me in Don. M20J. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
DonMuncy Posted February 29, 2016 Author Report Share Posted February 29, 2016 I put both of you on the list. Quote Link to comment Share on other sites More sharing options...
Hedge Posted February 29, 2016 Report Share Posted February 29, 2016 I have a center mount on my 66E, so I will be in on that side. If and when. Mark Quote Link to comment Share on other sites More sharing options...
LANCECASPER Posted March 1, 2016 Report Share Posted March 1, 2016 (edited) Received mine today and installed with the RAM ball joints that I bought. Don did a great job! Here are the sockets that I bought: http://www.gpscity.com/ram-mount-plastic-lite-arm-b-socket-rap-b-201-1u.html Edited March 1, 2016 by LANCECASPER 3 Quote Link to comment Share on other sites More sharing options...
FlyDave Posted March 1, 2016 Report Share Posted March 1, 2016 Lance - those look huge! Do they fold up out of the way well? Don - Do you sell all the parts for these? Quote Link to comment Share on other sites More sharing options...
RLCarter Posted March 1, 2016 Report Share Posted March 1, 2016 Hows that sketch coming Hank? Always good to look at different ideas Quote Link to comment Share on other sites More sharing options...
DonMuncy Posted March 1, 2016 Author Report Share Posted March 1, 2016 12 hours ago, FlyDave said: Lance - those look huge! Do they fold up out of the way well? Don - Do you sell all the parts for these? Dave, Sure, since I make the parts, I can sell any of them. As I have posted before, I am not trying to make money with the things I turn out. I try to get the cost of materials and a little extra to keep me from feeling like I am wasting too much time having fun with aviation stuff. PM me with what you are interested in. Don Quote Link to comment Share on other sites More sharing options...
Hank Posted March 1, 2016 Report Share Posted March 1, 2016 (edited) 12 hours ago, RLCarter said: Hows that sketch coming Hank? Always good to look at different ideas Sorry, I've been tied up with major home projects and visiting parents. To top it off, the new computer at work won't run our old AutoCAD, and I've been losing the fight with ProE. But that class is next week, so it will get better. Here is a quick hand sketch of a center-mounted visor with additional flexibility beyond that offered by my often-inadequate [but heavily crazed!] factory visors. Being a quick sketch, details of the hinges and attachment are not shown, but rotation at both ends of the rods are required. Mounting the visor to the arm is also not shown, simple Adel clamps as discussed above should work fine. In the excitement of the initial idea, I thought it would be possible to combine both shades along the side of the cockpit, but alas, that is not to be. They can be combined across the front corner, though, as shown at the bottom of the page. The curve at the top eliminates on of my pet peeves about sunvisors in the plane. The ones in the car, even in my old truck, seal pretty well against the ceiling and block sun above the visors. The ones in our planes don't do this . . . Experiment with cardboard and wire to get the curves right, to fit your windshield when mounted wherever on your center post your block can go. Oh, that's right, I didn't show any details for this piece, either, as several are discussed above. The joys of wiring in a workshop in the basement while ripping out part of the finished basement ceiling for access to the plumbing. All of my copper piping is pitted and leaking, and about to be replaced. Without these two concurrent projects occupying my time, along with the CAD issues at work, I may have produced a decent drawing. But this is enough to get you started if you think it's worthwhile. Hmmm, picture won't upload. "There was a problem processing the uploaded file -200" Drag and drop wont work either. Resized it really small, maybe it will take now. 428 kb Edited March 1, 2016 by Hank Quote Link to comment Share on other sites More sharing options...
82Mike Posted March 2, 2016 Report Share Posted March 2, 2016 Thanks Don they look great! Quote Link to comment Share on other sites More sharing options...
carusoam Posted March 2, 2016 Report Share Posted March 2, 2016 To view Hank's drawing (which is really cool) click on the drawing, and it will open in another window. In the other window it is easy to manipulate for best viewing. Best regards, -a- Quote Link to comment Share on other sites More sharing options...
Hank Posted March 2, 2016 Report Share Posted March 2, 2016 (edited) Let's try this again . . . center mounted Sun Visor possibilities, take 3. Hey, it worked! Now it just needs to be fleshed out and detailed. Edited March 2, 2016 by Hank Quote Link to comment Share on other sites More sharing options...
RLCarter Posted March 2, 2016 Report Share Posted March 2, 2016 Good idea Hank, "necessity is the mother of invention" now if we can convince the FAA that not everything needs a mountain of paper work to be functional. I consider sun visors as a "Safety" item and have no problem bolting them on my plane. Quote Link to comment Share on other sites More sharing options...
DonMuncy Posted March 11, 2016 Author Report Share Posted March 11, 2016 My efforts re visors goes on. I turned out a set for one of our Mooneyspacers, using a Ram mount and a fabricated ball mount in the standard attachment hole. It seems to work well but I still think the Ram mount looks bulky. I have now fabricated some larger ball joints which appear to be up to the job of holding the visor. As usual, comments, suggestions or interest appreciated. Quote Link to comment Share on other sites More sharing options...
Jim Peace Posted March 12, 2016 Report Share Posted March 12, 2016 http://www.aircraftspruce.com/catalog/pspages/composicleanSolarScreen.php?clickkey=12693 Best for the money and your mooney.... 1 Quote Link to comment Share on other sites More sharing options...
Hank Posted March 12, 2016 Report Share Posted March 12, 2016 Don't like the green. It would clash with my brown sunglasses. Quote Link to comment Share on other sites More sharing options...
LANCECASPER Posted March 27, 2016 Report Share Posted March 27, 2016 I ordered a sticker from StickerYou.com for the power chart on the sun visor (less than $20). The lines on the rows were on the .xls file but didn't show up on the sticker . . oh well. The old one was a little rough. MOONEY M20M POWER SCHEDULE.xls Quote Link to comment Share on other sites More sharing options...
gsengle Posted March 27, 2016 Report Share Posted March 27, 2016 What a great idea Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
DonMuncy Posted March 28, 2016 Author Report Share Posted March 28, 2016 Not only looks classy; useful too. Maybe I ought to up my price and furnish them with those, specifically for the plane. Just kidding. Don Quote Link to comment Share on other sites More sharing options...
carusoam Posted March 28, 2016 Report Share Posted March 28, 2016 Nice thinking, Lance! I'm glad you shared this insight. best regards, -a- Quote Link to comment Share on other sites More sharing options...
DonMuncy Posted April 1, 2016 Author Report Share Posted April 1, 2016 I now have my production under control and am beginning to start working on a design for the center post mounts. Can some folks chime in and let me know if all the models have at least 1/2 inch clearance between the center post and the windshield. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.