Mooney M20 Aircraft Landing Gear Motor / Acuator Dukes PN 4196-00-10 W/ SB kit

[silent101]

Just put it on ebay. If anyone has any questions just let me know. 

 

http://www.ebay.com/itm/271627588778?item=271627588778&viewitem=&sspagename=ADME:L:LCA:MOTORS:1123&vxp=mtr

 

 

For sale is exactly what is pictured. Included are the Landing Gear Motor / Actuator. The actuator was removed in working order in 2005 from a 68' Mooney M-20 C / #N6924N Serial - 680182. The actuator was found to have worn worm gear requiring removal. I am including a BRAND NEW Mooney Service bulletin kit m20-190-001 that has NEVER been opened. This includes everything needed to repair the actuator to Mooney specification. Also Included is the paperwork. Please note this is SOLD AS IS and will need to be thoroughly inspected before installation in any aircraft by Certified personal.



Removed in working condition and 100 % complete to the best of my knowledge SOLD AS IS

 

$1100 

[Culver LFA]

What's the deal with the Bruce's cover you have listed on ebay?

Give me a call or shoot me an email on that, glad you got it back!

[carusoam]

Silent,

Did you capture the gear ratio with that?

20:1 and 40:1 are the choices if I recall correctly...?

That may be an important question for somebody.

Best regards,

-a-

[outermarker]

is it the motor that goes bad (4196-00-1C) or the gearbox (3214-00)? who rebuild these two units and has them in stock? When can these two items be bought?

 

Is whats being offered an overhaul/upgrade kit?

[carusoam]

The 20:1 gear ratio over works the motor. Essentially, the combination of the two doesn't work very well.

The fix is the 40:1 ratio.

I am a PP with an old fuzzy memory. Check your details carefully.

Best regards,

-a-

[silent101]

Still have this for sale. The buyer ended up backing out. Can be bought anytime. This is essentially an overhaul kit. The 20:1 ratio works fine. either way you must inspect them every 200 hrs. The 20:1 need to be replaced sooner than 40:1 but i have seen 2000+ hrs on 20:1 and they are still in good shape. What happens is the worm gear will wear but STILL wears on the 40:1 ALSO. Just slower.