Search the Community

Hello All, I've been a lurker here for a couple of years. Back in March traveled to Durango, CO to do a pre-buy on a '67 F model. I ended up purchasing the aircraft and have put 100 hours on it since then. I have a bit of a unique situation - I'm Canadian, live in Mexico City, and do business between the USA and Mexico. Because my life is so spread out, I wanted an aircraft that could carry a decent payload, make it from the US border to Mexico City non-stop, and be fun to fly to the beach. The M20F beat out everything else I was looking at on price, simplicity, and pure fun. After signing the paperwork in Durango, I flew to Sandpoint, Idaho to visit friends, followed by a trip to my US base in Portland, Oregon, and then down the coast to Los Angeles where I picked up my mother (who got me interested in flying as a kid) and flew to Mexico City via Bisbee, AZ, Alamos, Sonora (I highly recommend the pilot-owned Hacienda Los Alamos as it has a semi-private strip), Zacatecas, and finally Mexico City. In Los Angeles I got my first taste of flying in a Bravo and even flew in IMC over the top of LAX on the way to Whiteman. Heading south through Mexico we flew over the famous Copper Canyon, a complex of six canyons covering 25,000 square miles. At first I was concerned that there wouldn't be anywhere to set down in an emergency, however I was pleasantly surprised to discover more airstrips embedded into the hills than I could count! I wonder what they use them for... I'm now on the tail end of a two week round trip from Mexico City to Bellingham and back during which I've had the opportunity to land in the Alvord Desert Playa, a must do if you're passing through Southeastern Oregon. The last 100 hours hasn't been without its challenges; the oil probe at the back of the WOLF oil filter relocation kit came loose at some point before arriving in Bellingham and started leaking about a quart of oil per hour. Advanced Aircraft in Troutdale got me sorted pretty quickly. On my girlfriend's first flight, I didn't close the door properly and it ended coming open mid-flight. Luckily we convinced the door to behave and my girlfriend still wants to fly with me. I'm attaching some photos of my adventures and will hopefully get a chance to meet some of you here on the forum or at one of the Mooney meetups this summer!

As a PPL student earlier this year, I spent many, many hours trolling these forums as well as other sites, trying to glean the benefits of others' experience. My goal was to acquire a plane that I could fly to/from client sites all over the east and midwest. I want to share some of my recent thoughts/decisions in case someone else comes along who is looking for similar info. I bought Parker's Encore-converted 252 in July, about the same week as I got my PPL. I thought really hard about whether I needed TKS at the time, but it was a big jump price-wise to find something already equipped. And, N252BH was such a nice plane... I went ahead and bought it and figured I'd sort through the TKS issue when I got to it. Fast forward to now, and I'm about 10 hours from getting my IFR. I've been trying to fly back and forth from my home in southern Missouri to a client site in eastern PA, every week. Let's just say that, as a VFR pilot in a non-deiced airplane, my opportunities to fly an 800 nm route to the northeast have been severely limited. I'm still flying commercially as a "fallback" 3 trips out of 4. First it was frequent IMC that kept me on the ground, and as the weather has turned colder, now it's ice. Doh! but I insist on learning the hard way, I guess. I thought really, really hard about where to go from here. Getting the IFR will help, but doesn't solve the ice problem. Short of not flying, I considered these options: a) trade up to a newer Mooney with FIKI buy a booted Baron as my winter commuter and load hauler (very appealing in some ways) c) upgrade 252BH with TKS If I were able to a find a partner, I'd love to have a B55 Baron. But I don't want to take on the financial responsibility for a twin, as a sole owner. When I see how many of those poor birds have been sitting on the market for years on end, I cringe at the thought of ever trying to sell one. And I looked at John G's transition from his Bravo to an Aerostar and, well, that's a whole 'nother league of cost. Be nice to have that 2nd engine in night-time IMC though... As for upgrading to a newer plane, it's a big jump price-wise to get to a FIKI Mooney that interests me. And, 252BH has a 1050lb useful load - it would be hard to replace that. It's got nice new paint thanks to Parker, and it's a low time airframe. The final data point came this past Monday, when I flew up to PA with an instructor. We picked up moderate rime ice on our climb to FL190, and ended up having to go to FL230 to get above the tops. At FL230, 252BH was doing this: Manifold: 28.5" RPM: 2400 or so OAT: -22C or so TAS: 207 kts, calibrated Fuel: 11.2 GPH, 25 deg LOP That was the first time I'd been above 15,500 MSL, and I was really pleased with the performance at FL230. I wouldn't want to fly that high all the time -- after 3 hours on oxygen I was feeling pretty crunchy by the time we landed. But nice to know the plane can do it, and maybe I'll adjust.... So I bit the bullet yesterday and booked an order for TKS and some new avionics. I had planned to get inadvertent TKS, but CAV and AirNet (installer) essentially refused to quote it. I was torn over the choice anyway, so with their "encouragement", FIKI it shall be. I feel good about that, although not about the cost. <cough> One other note: I decided that, while the plane was down for TKS, I'd go ahead and do some avionics and interior work. I talked to a number of shops around the country, hoping to find at least two places that could do all three tasks. Airnet Aviation at KLCK (Rickenbacker - Columbus OH) was the only shop I could find that could handle all three. I looked at breaking it up into 2 phases, but it's both cheaper and less downtime to do it this way. Here's hoping that goes well.