slowflyin

Lean aggressively for ground ops and it will drop. Towing my AC with my gas PowerTow results in readings in the twenties in some winds. Same with fuel truck.

Yes Sir, I'm tracking. The main feature of these fairly new, off the shelf cameras is logging. It isolates the plate and stores it with a date and time stamp. If I can set it up to delete data after 30 days, I may be able to stay between the lines. Also, the last thing I want to do is violate someone's privacy. Thanks again for the heads up. Just the nudge I needed to consider all angles.

Interesting. I'm in the process of upgrading the cameras around my hangar and have an ALPR capable camera in the "cart" for purchase. I'm located adjacent the access gate and thought it would be useful to the tenants on the field if anything came up missing. As license plates are readily viewable by anyone, I assumed they were not subject to any privacy concerns. Seems odd that taking a picture of a license plate at a location that is readily viewable by the public would be illegal. Thanks for the heads up. I'll certainly dig a little deeper.

I use antisplats EZ Oil filter drain. Exceeds expectations.

I've been using one for many years. Works great! When I first got it I tested with humidity levels and remember excellent results. Sorry, I can't offer the exact data as it was a long time ago. Of note, my unit has malfunctioned twice over the last decade or so. Both times I received excellent service! Both failures were in the early years. It's been at least six or seven years since the last repair and its running strong. I highly recommend both the product and the vendor.

I'm located in VA. For years I struggled with my Q-hut hanger. Cold as heck in the winter and unbearable in the summer. Worst of all was the corrosion on my tools. When I bought my Bravo I decided something had to be done. Three inches of spray foam insulation and a mini split turned my hangar into paradise. It definitely controls the humidity and when I'm working on the plane I just rachet the thermostat down to 75. The variable speed compressor in the mini split has eliminated any concerns about short cycling and ineffective humidity control. It's a whole different experience! Winters are the same. I typically set it on 50. If I'm flying the next day or working one the airplane, I turn it up!

It's a three layer mechanism. A black ring stuck to the glass connected to a black ring out front with the indicator ring slipping between the two. I had one in my 170 and found it useful.

Green 500 to go Yellow 200 to go Red Minimums.

I recall risers and wastegates on his first two engines. Maybe @donkaye can chime in. It's likely I may be mistaken. Memory isn't what it once was.

I agree and rarely run near 1600 TIT. That being said, the lack of data is frustrating. 1750 didn't work so they dropped the TIT max to 1650. Did 1650 not work? I've read all I can find and haven't been able to find any remarks regarding 1650 burning up someone's exhaust. Did your previous owner run 1650 as a limit? @donkaye has more experience with the Bravo than most and he runs very conservative TIT temps. He's still doing exhaust work mid-time. If he had used 1625 or 1650 would he have had a different outcome? One thread had comments from a gent that had a background in metallurgy, and he was fairly adamant 1650 was good to go. Wonder how his exhaust is holding up. In the end, all I can find is these engines need exhaust work, 1750 is bad, 1650 is Mooney's opinion, everyone else seems to lean toward some degree of cooler is better. How much cooler depends on who you ask. It's not my intention to be argumentative. Patience is appreciated in advance.

Mine doesn't require GAMIs. It will run smooth on the lean side. My biggest challenge with LOP ops is keeping the TIT in an acceptable range. 14.2 GPH-LOP puts TIT at or above 1650. I can lean to 13.2 GPH, 1625 TIT without roughness or surging for around a 10 kt penalty. I'd like to see 1600 or less. LOP, my highest CHT drops from 385 to 350. I'm constantly contemplating whether I should baby the jugs or the exhaust.

I've got a Victor Black engine in my Bravo and I love it! Silky smooth-runs like a sewing machine. No GAMIs but will run LOP if I choose. All that being said, a Lycoming overhaul comes with exhaust and turbo. Not so much with anyone else. I thought my exhaust was in good shape. Not so much.

I pretty sure you can wire it into the gear light circuit.

I've utilized Specialized for a truss with great results.

My CO will read 10 ppm if I leave the storm vent open and tow the AC with my power tow. These detectors are very sensitive. If lean aggressively on the ground, I've found it drastically reduces any CO readings. If I don't, I can easily have 25 or 30 ppm. 0 in climb and 0 in cruise.

I adjusted per the Mooney SM. Considering the beam presentation is so different compared to the old GE bulbs I wasn't really sure what kind of results to expect. Pleasantly surprised to say the least.

Pic of my departure early this morning. Two G3 landing, two G3 taxi lights and two led recognition lights. Couldn't be more pleased. Thanks James!

Sunday morning, I heard a fellow Mooney driver on freq. and then picked him up on ADSB. Nice GS!

I've always thought an audible alarm would be a nice addition.

I would guess an F with J cowling and WS would have a higher UL but lack some of the interior refinements.

Good afternoon, I may not be the best to answer as I don't fly a Continental. My Bravo has a Lycoming TIO-540 and my Skylane has a Lycoming IO-540 with Cessnas bolt on Turbo. Since no one else has responded here ya go: How long do you expect to get out of a set of cylinders ? Time in service ? Bravo ran to TBO. About 2100 hours. Skylane 1400 hours (previous owner) How long have you gotten before needing cylinders ? What symptoms made you remove cylinders ? Above Is it common to do a top overhaul on such engines ? Not unheard of on the Lycoming's but I wouldn't call it routine. Others can comment on the Continentals. My inquiry would only apply to map turbo systems, which produce the same boost at sea level or at the service ceiling. Not turbo normalized engines which have a much easier life. finally, can you share your experience with top overhauls ? What would you like to know?

Congrats!

I started looking at Champs but I’m drawn to the Citabia for sure.

I have my Bravo and a 182 we use for work. Looking to pick up a Champ or Citabria. I also turn wrenches on some of our survey aircraft so there never seems to be enough hangar space. Additionally, I run the FBO on the field and occasionally we have someone transient looking for shelter overnight.

Certainly money in the budget for a fridge!