Jump to content

Hank

Supporter
  • Posts

    18,540
  • Joined

  • Last visited

  • Days Won

    112

Everything posted by Hank

  1. That's exactly why I haven't "upgraded" to digital, I can read my steam gages faster.than I can focus on the airspeed number, to say nothing of the things that disappear! I reference my IVSI frequently, especially inside a bumpy cloud.
  2. What do fine wire plugs cost? The last massive I bought just a few years ago were $30 each, versus a set of 6 for my Ford Ranger at $17 and some change. I recall discussions that fine wire plugs last ~2000 hours, while massives are ballparked at ~500 hours, but fine wire plugs cost much more than four times massive plugs, so there needs to be some justification for the (significant) extra expense; a half gallon per hour for 2000 hours is 1000 gallons of avgas, which should be several times the cost of 8 fine wire plugs.
  3. I'm just an engineer, keeping everything running, doing lots of testing, and starting up the new models. I've read about adjustable eyeglasses but not adjustable lens implants (IOL = IntraOcular Lens implant). Relax and think about flying instead of this. If you have a good eye doctor and see well with hpthe lenses he prescribes, the surgeon can match it and have good results. Sounds like you have that important piece taken care of. Now relax and think about flying without having to crane your head in strange directions to see your new panel!
  4. My aunt said she was very worried for several days, and right after surgery she said there was nothing to worry about. Don't remember mom & dad saying anything at all (they had three eyes done between them). All new employees watched a video on our first morning at work, taken through the surgeon's microscope, with the eyeball about four feet across on the wall. Took about ten minutes. "This is what we make. Quality is important. Be sure to follow all procedures, no shortcuts!" You can't be put to sleep, but they give you something to help relax. There are no stitches, only eyedrops for a few days afterwards. No one does both eyes at the same time, you'll know what to expect for the second eye if you do it, too.
  5. I made the lens implants for ten years, 2004-2013. Surgery takes about 10 minutes for one eye. Never heard anyone say they didn't like it. Things to watch out for: Many lens models are available, with a multitude of corrections. Get what you need--presbyopia, toxicity, myopia, etc. Multifocal lenses are available. J&J advertises a contact lens (1/2" across) with three focal zones; in 2013, we made lens implants (1/4" across) with up to 13 focal zones. Many surgeons recommend single vision lenses to engineers and pilots, because those groups are "too picky." Lucky me, I'm both! Some people mix their contact lenses, one eye near and one eye far. The FAA doesn't like this. It can be done with your implants, but unlike contact lenses, they require surgery to change. Potential gotchas as of ten years ago: Some people experience halos around bright lights at night. Some lenses with multiple correction factors (myopia, non-sphericity, and toxicity combined) can create "apparitions" / "optical phenomena" at the edges of your vision, where light reflects off of the edge of the lens. If you see these after surgery, ignore them and they will go away (your brain learns to ignore them); fixate on them and stay all bothered, they will become permanent (your brain learns to pay attention to them). That's about all I remember. I recommend getting lenses with UV protection (they are generally some shade of yellow), and what Alcon calls "wavefront technology" and ask if you need aspherical, too. Look at your current prescription, if you need toricity there will be an axis shown (i.e., left eye 118°), which the lens will be rotated to match during implant surgery. Good luck and enjoy your improved vision! Many patients no longer need glasses, but some may still need readers depending upon prescription and lens features.
  6. Looks like Pencil CAD to me! Definitely a straight edge (I uses to carryna small 30-60-90 triangle in my shirt pocket) and either a compass or circle template. But it looks much better than a completely freehand sketch.
  7. My one-piece belly is fiberglass, but it was already installed post-gear-up synthetic previous owner.
  8. @skydvrboy, no idea what his tester uses as Pass / Fail criteria, but I've always heard 5000 ohms. A simple multimeter with two probes will show you the actual resistance, then you decide if it's too high. No need for a fancy tester with lights and what not, especially if you don't know how it works.
  9. I'm fine needing a complex endorsement to fly my Mooney--got it years and years ago. But qualifying the airframe as LSA would make a big difference as we all age in place . . . . My goal is to join the UFO Club, and doing it in my Mooney would be nice.
  10. This works well in colder parts of the country. Here in Sweet Home, such things aren’t necessary--if it's too cold, just wait a couple days. We had frost Monday and Tuesday mornings, and Wednesday and Thursday were near / over 80°.
  11. Nice catch! Now I feel the sudden need to check mine . . .
  12. I've done that a couple of times. A case of oil on each stab, some old bound approach plates, my roll of wrenches, etc.
  13. You aren't supposed to use anything but wing jacks. Mooney says to not pull down on the tail; Lycoming says not to lift the nose by the engine hoist points; Hartzell and McCauley say don't lift the nose with a prop jack. So use the jack points under the wing, and the plane is supposed to magically balance while someone climbs in to operate the gear and get back out, and be steady enough to remove the wheels . . . We all just need large pouches of fairy dust! P.S.--I wouldn't lift by the engine mount! That outs force.90° to the bolts, and they aren't designed for that. Having a couple of overstretched engine mount bolts break in flight could be unrecoverable!
  14. A good headset kills lots of noise, takes little effort and no W&B issues. My wife didn't want an in-ear headset, so I bought a set of yellow Halos (mine are black) and told her if she didn't like them that I could sell them for what I paid. She used them in a 30-minute "test flight" and told me not to sell them. Halos work as well as active noise canceling headsets for a third the price, and a wifi adapter is available too.
  15. Joey Cole is in Dalton. Short drive, shorter flight. If he can't do it, he may know someone else.
  16. Mone didn't leak enough for me to tell, but my IA just told me that it was stopped up.and wouldn't drain (yes, I changed my own oil, but it's in annual and was due). So it's coming out . . . .
  17. Tech and prop change with the engine STC. Not sure about airframe or landing gear changes. When did they come out with the new Max Landing Weight? And is there a difference in fuel capacity? I dunno, never really shopped for a Long Body.
  18. Maybe he did the 310hp upgrade, and thinks that makes his O1 equivalent to the later-developed O3?
  19. I have several friends who hand-prop their Champs from behind, with their left hand on the throttle.
  20. My Owner's Manual says to reduce airspeed 1 mph per 1000 feet to 10K, 100 mph at sea level down to 90 mph at 10K; no information is provided any higher. Keeping constant airspeed should reduce your climb rate. Unless your F is really that different from my C . . . .
  21. I left my Mooney at Wet Wings, with the canopy cover on. Handed the keys to Edison. Call.and talk to him about it. Fuel after the seal came from Banyan, and he took me over in his golf cart to pay the bill. You'll likely need to get over to the commercial airport KFLL for the ride home. Edison can advise on that, too. When I went back to pick it up, due to airline schedules I had to arrive after dark, and taxied to a hotel across the street from KXFE. Uber will likely be better, but I was there in 2010 . . .
  22. You can also poke around with a pick and often find the nut, too. With the tip in the nut, you can push/pull the trim over it, then quickly replace the pick with the screw.
  23. Thanks for repeating yourself . . . Amem, brother! Little dents won't condemn our airframes!
  24. My Nissan Altima, running on Regular gas, gets 38-39 mpg commuting through the woods to work, 35 miles each way. Loaded on a road trip on I-85 from SC, coming across Atlanta and back to Sweet Home, I've seen as high as 41 mpg. And no stinky, greasy diesel fuel to deal with! Dump the SUV and you'll be shocked at the GAS mileage you can get . . . . .
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.