Celso Backes

I have a Mooney M20e that required two from seat to be changed due to corrosion. My seat part numbers are 140040-505 can I put a 140040-503 which is a M20e same Model but different serial number efectivity then mine.

Thank you I appreciate the feed back...

Is Camguard better or just another brand name but same oil???

Montgomery AL deep south brother!!!!!

I just bought, well 3mo ago a 1969 M20e and ha ve been using Aroshell aviation oil 100w. Is this what you all use or is there something better to run in it.

.64 qtr an hr

steal cylinders current update cylinder #4 has oil on the plugs alot of oil. so need rings and going to get it done and see what happens It was checked a week latter and it shows 3qtr went somewhere most likely #4 burned it up. compressions are good all between 72 and 78

I checked it two days after the flight.

i checked two days after the flight...

it only flew last year for 9hrs and then sat a good bit of the time...

it is not dripping any oil in the hanger

I started my flight with 7qtr and end my flight with 4

I just bought a Mooney m20e and it is consuming a lot of oil. It had a oil change and then I flew for 1.2 hrs and it consumed 3qtr of oil. The compression are all in mid 70's and it flew fine with no problems. It did have a new cylinder put in it this past August and has flown about 6hrs on that new cylinder. It burned a lot of oil on the ferry flight from Tx to Alabama. Does anyone have any suggestions.