Jump to content

flyingchump

Basic Member
  • Posts

    184
  • Joined

  • Last visited

Everything posted by flyingchump

  1. Do you need the inner cable/wire? The inner wire is just piano wire. Find a piano tuner that has an A&P and your all set!
  2. I learned to fly at Andover. Great little airport. Not alot of Mooney's land there as the short runway scares many off... All those birds are just looking to get a closer look at your awesome bird. Good for you!
  3. My engine looked like that when I bought my plane. I had 3 main oil leak areas: 1) I found 3 crank case half bolts that were not tight at all. I could turn then with fingers... SO I had oil seeping out from the halfs. They were the 3 hardest bolts to get a wrench on so I knew the previous maintainers were just lazy. After finding this I retorqued every single bolt on the crankcase halfs and the oil sump. It took longer than you'd think but it was worth the peace of mind and stopped a lot of oil. 2) I replaced all 4 of the oil return line hoses. There are 4 little 2-3 in sections of rubber hose under the cylinders (2 per side) . The rubber gets subjected to the heat from the cylinders so should be replaced often anyway. 2 of mine were leaking (very slowly) but the oil was blowing everywhere and making a mess. 3) My biggest oil leak was the gasket under the oil filter adapter housing which is immediately above the governor. Like you, I was sure my leak was coming from the governor but it was higher and I just couldn't see it. There is not a lot of room back there so I bought a cheap-o borescope camera from amazon. I was able to navigate that little thing back there and find the leak. Maybe my story can help you. Good luck.
  4. Save you money on the foot wells. Don't buy new ones. You can buy new wall panel kits from airtex with the foot well eliminated for a completable price. Your wall panels looks bit dated anyway. I did this on my E and loved it.
  5. I used my wife's cricket to make a mask for a reverse mirror project. I think it came out pretty damn good.
  6. Build a traveling toolkit to keep in the plane. Commonly used tools and some extra common parts. Spark plugs and gaskets, 4 in 1 screwdriver, knipex pliers, voltmeter... Whatever. My favorite additions was a clip over the interior that I could hang my headset from.
  7. So I selling my E... I don't really want to but life throws curveballs. I'm not is a rush and will wait for a good buyer. More info over on Facebook. https://www.facebook.com/marketplace/item/408538294005704/
  8. I just listed my E for sale over on facebook... I'll give it a day or 2 on facebook before it start listing it elsewhere. https://www.facebook.com/marketplace/item/408538294005704/
  9. If only it were last week... I just spent hours patching mine, installing new baffle seals, and felt. It'll find a good home.
  10. I did my primary in a 172. Then bought an E. The transition went really well with no real concerns. I feel very comfortable I'm my plane.
  11. I saw your post on FB. Sorry to hear about your situation. When my bendix stuck I used a pick with a 90 degree tip to pull the bendix forward just a bit. It was enough to get it unstuck. Good luck.
  12. I'd love to have the B&C starter. The cost of it held me back but knowing it hits the FS is more important. I've heard about the skytec issues but I don't see another option that's much better. Thanks for sharing.
  13. So yesterday my starter pissed me off for the last time... It decided it didn't want to work again... I hear a healthy click from the starter solenoid but nothing else. No starter rotation at all. This has happened before and the starter was IRAN'ed about 10 hours ago. It was a bad solder joint in the field winding at the terminal. and before that is was a sticky Bendix... and the time before that... so on. I wanted to keep the old heavy duty starter as I thought they were bullet proof... I guess not, its let me down too many times. It might not have been so bad but my wife and I were on an island, no mechanic on the field, on a Friday afternoon so the FBO left early, not knowing anyone local, with no rental cars available... Not happy. I tried smacking it with hammer, nothing. I had a volt meter and checked the voltages, all good. What the hell, lets try hand propping... What could go wrong right? Surprisingly nothing went wrong. My wife operated the throttle and mixtures (for the first time) and I threw blades. It started after 6-7 blades!!! All checks good! Lets go home! So now I'm ordering a skytec starter, 149-NL (I counted teeth), but is there anything else I need to order to make the swap? I heard about needing a longer starter cable but can't find solid info on that. I'm tiring to avoid the plane being grounded for weeks by placing on order for everything instead of placing multiple orders to get the "unknown parts" later. 66E, IO-360 A1A
  14. It's a bent piece of aluminum... Make it yourself.
  15. I have used a cheapo borescope form amazon for all sorts of stuff. Its not the greatest for the cylinders as mine cant do a tight 180degree bend but it works great for many of the areas you need to see but may not have the contortionist skills needed. https://www.amazon.com/gp/product/B01MYTHWK4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
  16. I hadn't considered it... but hell. Why not. Anything to help pay for gas. I'll have to look into selling. throw a price at me.
  17. The position is good. I can sit with the seat in any position and my knees/legs won't hit my headset. I could print out a few but keep in mind I designed for this to work with my interior panels (airtex wall panels). If you have a different interior... results my vary.
  18. That crack was already there. Whatever yahoo did the interior carpet and wall panels last was a dumbass... I took the entire interior out over winter and fixed all the shit the last guy did wrong... Took forever. The plastics were pretty good (with a few small exceptions like the crack you pointed out) but the wall panels were awful. They were all attached poorly leading to warping and stress cracks. Now its all done right and the only things that bothers me are small problems like where to put my headset... The bracket actually helps keep the crack stable.
  19. Most of it. The pilots side is in pretty good shape but the passengers side...
  20. So I've had my E for over a year now and never found a good place to store my headset. Best option I found was putting them on the floor close to the rudder peddles. Not a great option but it allowed me to get in and out without getting tangled. I printed out a hanger I modeled that will slip over the top of the wall panel. I also printed out a mount for my headset controller. Now everything is nice and cleanly tucked away. I can get in, adjust my seat, and attach my seatbelt without my headset getting in the way.
  21. Yup. I had to do the same. I just installed an airtex wall panel kit and I cut this area just a bit for easier access. I also installed a new 2.5 scat tube on that vent. The old scat tube was so tight I couldn't access the laver for the valve. I added a few inches to the length of the 2.5 in scat and now I can get my hand up there to turn the valve. New radios and modern transponders don't necessarily need cooling. Old equipment does. I just closed mine and plan on going on a few flights to see how it goes. I was getting high CO in the cabin on the ground but none in flight. I think the radio cooling tube was letting CO in while on the ground. Time will tell.
  22. This mod looks interesting. Looking forward to seeing your numbers. How much more of a PITA is it to pull the top cowling our the dreaded lower cowl? Is the install time actually around 12 hours as ARI estimates?
  23. I was going to say this. The clamps on my E are 180 degrees from what you have pictured.
  24. I had the same thing on my 66E when I bought it. Io-360-a1a. 2 of the lower crank case bolts were loose. Like not even finger tight. I had oil blowing everywhere... My 2 loose bolts were the hardest ones to get to. The ones where the starter and generator are pretty much in the way. I saw this as laziness on whoever maintained my plane prior to me and no brownie points were earned for the guy who did my pre-buy. Anyway, My IA and I checked the torque of every nut and bolt on the engine. No more oil leaks!
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.