Jump to content

AvionicsGeek

Basic Member
 View Profile  See their activity

  • Posts

    26

  • Joined

  • Last visited

 Content Type 

Everything posted by AvionicsGeek

  1. AvionicsGeek
    Yes I did lol sorry my bad! Long bodies will come at a later point from what i've heard.
  2. AvionicsGeek
    Yes they do lol. If you phone them as a non dealer with a technical question they will simply tell you to contact your nearest dealer.
  3. AvionicsGeek
    Ok I'll answer here as I can't see that anyone has explicitly answered the original question. The IFD540 will work fine with the G3x. BUT, if you have a G3x I presume you would be looking to do a GFC500 autopilot? Unfortunately there are certain coding anomalies that prevent the IFD540 working properly with the autopilot in Approach mode. Meaning that to get approach mode to work correctly you have to buy the GTN navigator from garmin as well- as is their want for you to have a full garmin setup. If you had a G3x and an IFD540 and integrated it into a 3rd party autopilot like an stec etc that is supported by Garmin or avidyne, then I can't see any obvious issues with that setup. Both the Garmin suite and avidyne are dealer protected installs, so they won't sell direct. Dynon are maybe a little more flexible- their certified equipment is supposed to be dealer protected but since their dealer network isn't fully grown yet they have been allowing A&P/IA's to install the Dynon equipment independently- an IA as you still have to submit a 337. The Dynon HDX is as powerful and versatile as the G3x Avidyne and Dynon from what I gather may well be working closer together in the future so expect a much more complete integration between them in the future. I'd personally hold out for the Dynon autopilot and install the whole dynon setup. To get round the aviydne dealer protection what you could do to limit shop time is buy an install kit of a GNS530 (And get an IA to sign it off with a 337), wire that all up and simply take it to an avidyne dealer for a 'slide in replacement' so you might pay just a couple hours shop time for them to configure it and do the paperwork.
  4. AvionicsGeek
    The certification department of the FAA has been closed since the original corona shutdown, I don't even think it's reopened again (Our local FISDO certainly hasn't!) so there hasn't been any progress there. I have seen evidence of the Seneca and their Mooney out flying (whether the Mooney has a working autopilot in it or not I can't tell) One can assume that once the 182, seneca and A36 which are currently under certification testing and the FAA reopens, that their focus will be putting the rest of the paperwork into the FAA's hands. Expect certification for long and medium length mooneys but wait for long fuselage ones as that will be applied for separately.
  5. AvionicsGeek
    With this setup in the past (An aspen as PFD and gi275 or a G5) the Aspen PFD replaces the AI/HSI, the G5/Gi275 replaces the requirement for the Turn/Bank. But we have always kept the original ASI and the Altimeter
  6. AvionicsGeek
    Ah ok, that is quite a trek! Feel free to send me a private message and I can let you know what kind of deals I'd be offering, might just be worth the flight!
  7. AvionicsGeek
    How close are you to Reno? Im doing a start of year bulk order with Dynon certified so Im doing a one-off special savings deal for orders/deposits paid at the beginning of the year
  8. AvionicsGeek
    What model is it you have? I don't think there's too much to worry about. It just depends how many models they're able to piggy-back on the initial approval
  9. AvionicsGeek
    Incase anyone is interested, We've had a cancellation for February! So if anyone needs a slot for avionics upgrades just let me know
  10. AvionicsGeek
    At the moment I think the only thing the NGT9000 would be able to send the HDX is WAAS GPS position... The HDX doesn't have the same data format for traffic and weather that that transponder, or the GTX345 etc speak, so at the moment Dynons ADSB IN device is the only one capable of displaying traffic and weather on the HDX. I would need to check on if the HDX can remote operate that transponder but I doubt it
  11. AvionicsGeek
    The 10" HDX screen with AHRS, magnetometer, all the mounting trays and most of the harnesses, ADSB IN module plus backup batteries plus D10 backup with backup battery is just over $10k (+$499 for the A429 adaptor to connect an IFR navigator) +a new panel if required. Some can get away with keeping their current panel and just cutting the access into it but most of the time we just recommend having a new panel cut. Plus STC cost of $2000 The Autopilot cost is just a guess ballpark atm as the prices haven't been released as its not certified yet. Comparing it to the C172 which is a 2 axis (It's not fair to compare it to the bonanza kit as thats a 3 axis autopilot) The C172 autopilot package is $2910 Plus Installation So if you were perfectly happy with your current engine monitoring system (The JPI is a nice package in itself) and if you've already got a transponder sorted in your panel and you kept your radios etc etc. It would still be a good system as you could just dedicate all of the HDX screen area to PFD and mapping- plus with the autopilot and coupled with a Nav/Com/GPS navigator you'd still get full IFR approach capability with both ILS and LPV approaches. So for all described above its around $15,500 plus installation
  12. AvionicsGeek
    As an add on yes, but of course you still need the HDX efis system installed to control the autopilot. The Trutrak works independently. so you’d save money if you were already intending to modernize your instrument panel anyway
  13. AvionicsGeek
    Well their engine monitoring system is pretty awesome, highly configurable and you can track trends etc. I would personally install their autopilot rather than a Trutrak not just due to saving money but the Dynon autopilot FD panel is a must have- so nice and quick to choose your AP modes, engage VNav etc- connect the Dynon to a certified GPS navigator and it’ll do full LNAV approaches on the autopilot and from what I’ve seen so far it does it very well! I personally would do Trig audio panels and radio (or Trig Nav/com) Rather than using the Dynon radio and intercom system, plus add an Avidyne IFD and it’ll be a beast of a system
  14. AvionicsGeek
    The 2650 is just a guess for the Mooney right now as it hasn’t finished certification yet and their prices haven’t been released, that is the cost of the install kit for the 172. Install for the autopilot would be around 25 hours inc removal of old autopilot ($2750 labour)
  15. AvionicsGeek
    I do agree, it is a lot smarter to just go for the full system straight out the gate- it is what I advise people to do. There are some though that prefer to do it gradually- add to it when they can afford it etc
  16. AvionicsGeek
    I reckon it’ll be around the same as the 172 at $2650. It’ll go in quicker than the trutrak so figure 25 hours inc removal of old autopilot . oh plus I forgot the $2000 STC cost (non discountable) but that covers everything, if you got the screen now but waited on the engine monitoring and autopilot you wouldn’t have to pay the STC cost again
  17. AvionicsGeek
    List prices You’d probably be looking at $8400 for the screen and install accessories, $475 for the IFR connectivity, $1860 if you wanted to add the engine monitoring, $150 ish, maybe less in network cables. Their ADSB in box is $795 and is the only way you can get traffic and weather on the displays I believe- it doesn’t take traffic and weather via a transponder or gps navigator. I’ve got a couple installs booked for the beginning of the year so I’ll know a more accurate estimate of hours but dynon estimate minimum 50 hours and I presume that’s for a basic 1 screen setup (so $5500) without engine monitoring. But if you had a new instrument panel cut out and wiring done on the bench it could probably be done quicker. The system goes in pretty easily- it depends how much of a PITA it is to weed out all the connecting wiring and how good the existing pitot static system is- also depends if you need wires run for a remote magnetometer- you won’t always need one if the built in one in the AHRS works well. and yes we would be able to beat list prices
  18. AvionicsGeek
    It’s a bit further off than I’d thought- end of Q2 next year- if you don’t wanna wait that long the dynon HDX will interface nicely with the trutrak but it’d be quite a bit more expensive than waiting until the dynon one is certified
  19. AvionicsGeek
    Yes the impression I got from our Dynon guy was that their timetable was very similar. They’re getting a bunch of additional models added to the approval by piggybacking. I’ll be chatting to them again next week so I’ll try and get more specifics as to what stage they’re at and their timetable
  20. AvionicsGeek
    Yes we've done quite a lot of E5's this year, mostly as an Aspen/Avidyne/Trutrak bundle. They're great for people wanting just a little bit of glass and to remove their vacuum system. Pain in the ass to connect up to the likes of old century autopilots tho...
  21. AvionicsGeek
    We've lost count of the number of Avidyne navigators we've done. I've done a few of the HDX and autopilot installs in LSA and homebuilts, we're just lining up our first certified install customers now- but the Dynon equipment is nice to install, especially if we use our Autocad software to design a new panel layout and have a new instrument panel cut so it's all wired up on the bench ready to install in the aircraft! Also we're able to offer good Bundle deals on Aspen E5 with an Avidyne GPS navigator. (The Aspen E5 works great with the new TT software)
  22. AvionicsGeek
    Thanks! We just signed the deal over the last couple of weeks, our details should be going up on the Dynon website very soon. We are listed on the Avidyne dealer network and TruTrak.
  23. AvionicsGeek
    Hi Mooney fans! Im from Advanced Aviation Reno Inc and we are a dealership and install facility for Dynon certified, Trutrak autopilots, Avidyne, Trig Avionics, JPI and Surefly ignition systems! We love all Mooneys and we work on them all the time. We've been waiting on TruTrak finishing certification on the Mooney variant of their autopilots but after chatting today with our contact at Dynon, it seems highly likely that the Dynon autopilot for the HDX may be ready at the same time, if not before! (I presume TT and Dynon may have been working together?who knows) We can also do Aspen E5 units and G5's on request and the Dynon display with integrate nicely with the TT- the Dynon version will be quite a bit cheaper and the overall cost is way cheaper than a Garmin G3X setup, both in equipment cost and installation time. So any Mooney work that needs doing (Avionics or mechanical) and you're in flying range of Reno give us a shout! Ask for me (Calum) and I can hook you up with a great avionics deal. We can give discounts on bundle deals like an Aspen and TT, or A dynon and Avidyne IFD email: avionics.aari@gmail.com facebook: @advancedaviationreno We also have a website but I haven't got around to overhauling it yet: www.advancedaviationreno.com
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.