Navionpaul

I have a KS272 trim servo from a Mooney. Operating when removed for upgrade. It’s a dash 11. Call if still looking, Paul 612-804-9792, $250 plus shipping.

Hi David, Did you find out what was causing the roll oscillations with your KFC200 2 years ago? I have that problem now with my Navion. Thanks, Paul

Hi Bob, I installed the KG-102 and KS-272 today and they ground check OK. I’m optimistic that my KFC-200 may have a new lease on life thanks to you. Also, there is a Mooney guy who is looking for a KC-295 on this site in this avionics section dated 3-5 and member name spistora. Good luck, Paul

Hi Bob, That’s perfect, thanks. Is your GFC500 working yet? Did you end up re-using the King trim switch? Is the KC-295 still available? Paul

3-12 is fine. I’ll mail the check today. Thanks, Paul

Hi Bob, I want the servo so I’ll send you $225 which should cover shipping. I found your address and you can send the servo to me c/o Neal Buethe, 2012 Wellesley Ave, St Paul, MN, 55105 after you get my check. Thanks, Paul Thomas, 612-804-9792

Hi Bob, If you’ll cover shipping I’ll send you a check for $200 when I get your address. My address is Paul Thomas, 240 Spring St, Unit 410, St Paul MN, 55102. I won’t be home until 3-12 so no hurry, Thanks, Paul

Hi Bob, is the pitch trim servo KS272 operable?

Hi Bob, Yes, I’m interested at $300 plus shipping. Paul

Hi Bob, If you still have the KG102A , I’d pay $300 for it and cover shipping.

OK no worries, Good luck with the Garmin.

Can’t use the KG102A but will wait for the trim switch

Thanks Bob, I’d like the trim switch and I’ll let you know about the KG-102A after I check my dash # this afternoon. Paul

Hi Bob, Is the KG102A in good working condition? I’m also looking for a King electric trim switch. Thanks, Paul