JWJR

Correction that is 7415V

Hi All, N714V 1975 M20C Has been sold to Pablo Sagion and is headed from the Pittsburgh area to Southern California. During the the ownership transfer (sale) process Pablo mentioned he is on Mooneyspace occasionally. He is a Veteran and seemed like a intelligent nice young man enthusiastic for flying and Mooneys in particular. Anyway if he should chime in here at some point please welcome him. JWJR

If your going to start IFR training soon. And plan to use it on a regular basis for extensive travel. I would shop for an Auto Pilot first and plan your other upgrades/replacements around that choice. All the better if you can get that installed prior to IFR training. You may as well train utilizing the same set up you will eventually travel with. Sent from my iPhone using Tapatalk

Thanks…. Maybe he meant to say Continentals. Sure looks like your not going to get a good look even if you could fish a scope down and back up. Sent from my iPhone using Tapatalk

I just read an article In AOPA Feb 22 issue by Mike Busch. He mentions you can get a look at a few cam lobes in most Lycomings using a borescope down the oil filler tube. Has anyone here done this and willing to share details on how well they could see the lobes? …was it worthwhile? I assume you would do this with the oil drained and allow the engine to cool. It’s easy to remove the filler tube. Would this make it even easier?Do you need an articulating scope? Thanks in advance Sent from my iPhone using Tapatalk

I directly asked if it was removed for the pre- buy ( many posts ago) and RB relied yes in a post shortly thereafter. I remember when I volunteered to assist for my first Mooney annual. I was handed a flashlight a mirror and a creeper to maneuver around on. I said ok once it’s open what am I looking for. I was told there’s some parts that needed lubed and they will take care of that. My job was to look all around with the mirror and see If a mouse has taken insulation from a seat bottom or behind the side panels and into the wing to build a nest. Old Jim said you’d be surprised where those rascals can hide and build a nest. I’ve never seen any in the Mooney however they ruined all the wiring on a Bonanza hangered on the field. Also found a nest in a Archer wing tip while installing a Skybeacon. Sent from my iPhone using Tapatalk

Correct me if I’m wrong here. The panel was removed for the pre-buy inspection. Ok so the difference between discovery of the corrosion during the pre-buy and discovering the corrosion during the annual was an inspection mirror and 3-5 seconds of labor.( holding a mirror using a flashing and your eyes to see). Hmmm I wonder if it was the same mechanic for both inspections in that panel? If I’m correct then why did he remove the panel during the pre-buy if he was not going to do a proper inspection? It’s like taking the toilet paper off the roll but not wiping your ass? Half ass job Sent from my iPhone using Tapatalk

So this spar that needs replaced. Would this be a part that could be fabricated at the shop or would it have to come from Mooney? Is it in stock on the shelf at Mooney? If from Mooney make sure you ask for turn around time RB. You seem like a patient fella but knowing what to expect prevents dissatisfaction later and might factor in to what option you choose. Sent from my iPhone using Tapatalk

So based on the photos and location of the corrosion does anyone want to guesstimate the eventual repair invoice? Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Hey …then why the hell did they pull the panel? You can’t be serious! Yes I’ve had everyone of my panels opened. I use a screw gun borescope,mirror and flashlight. Takes an hour plus a side. I look at pc tubing, pushrods, signs of mice , and for corrosion. When I had my prebuy the mechanic missed a few things. Nothing major! I fixed them and never even mentioned them to the broker or mechanic. Spar corrosion is a Major issue. A deal breaker and for some a planes a cause to scrap em. Why do mechanics do prebuys….. hmm for money maybe $1700.00 or so. If they are going to do them they should be done right. Sent from my iPhone using Tapatalk

Don’t miss understand me. Let’s say the cam is bad and this leads to an overhaul 30 hour post prebuy inspection. Ok the shop cut the filter and it was clean. During test run up oil pressure was good and the engine ran smooth. Ok the shop did their due diligence. No one expects them to pull cylinders to get a look at the cam. I alway say what is working today can be broken tomorrow. This ( the corrosion) was a simple miss in plain sight. No excuses. The panel was off. The perspective of getting what you pay for does in fact prevail across the GA landscape …. With the pilot folks I know anyway. Anyone trying to make an excuse for the shop is full of BS. If the shoe was on the other foot I wonder what their perspective would be then. Sent from my iPhone using Tapatalk

Ok a flashlight and a five dollar inspection mirror or a two hundred dollar articulation borescope could of easily detected the corrosion. The fact they did open the panel up definitely indicates it was a miss. So the question is why did they remove the inspection panel during the pre-buy? What were they looking for in there? Hmmmm. Ok I feel like I’m stirring the pot here so I’ll stop. Try to reason with these guys and get it resolved. I just want to confirm your initial instincts that you were wronged and you have recourse. Sent from my iPhone using Tapatalk

Did they remove that inspection panel ( the one the pics are from) during did the pre-buy? Sent from my iPhone using Tapatalk

I respectfully disagree and so does my attorney sitting across from me right now. A prebuy is exactly that a prebuy inspection. You may be an expert in FAA policy however a judge is not concerned with FAA policy at all. It’s as simple as it sounds. He paid to find deficiencies in the aircraft. They overlooked a SUBSTANTIAL one. Kinda like malpractice or a structural defect missed during a home inspection . We all know it was negligent and any subject matter expert will attest to the same. You can do a legal annual with an oil change ,compression check and verified AD compliance. The judges I know are concerned with making things right ..not paper contracts. If the work order says prebuy it is inferred that it is done to protect the buyer from major issues/expense. Unfortunately I’m related to a judge and spend lots of time with attorneys ( playing cards) and the ones I’ve mentioned this scenario to all said it’s a simple open and shut case for buyer. Now all that being said I believe that’s basically what he was trying to do … turn it into an annual. I don’t think anyone here with a straight face could say missing this during a pre-buy is not outrageous and unacceptable. Sent from my iPhone using Tapatalk